TM T88III umd com au

Tm T88iii Umd Com Au-Free PDF

  • Date:25 Sep 2020
  • Views:2
  • Downloads:0
  • Pages:10
  • Size:279.83 KB

Share Pdf : Tm T88iii Umd Com Au

Download and Preview : Tm T88iii Umd Com Au


Report CopyRight/DMCA Form For : Tm T88iii Umd Com Au


Transcription:

Printer Parts,1 printer cover,2 cutter cover 4 control panel. 3 cover open button,DIP Switch Tables,Serial Parallel. SW Function ON OFF SW Function ON OFF, 1 1 Data receive error Ignored Prints 1 1 Auto line feed Always Always disabled. 1 2 Receive buffer capacity 45 bytes 4K bytes,1 2 Receive buffer 45 bytes 4K bytes. 1 3 Handshaking XON XOFF DTR DSR,1 4 Data word length 7 bits 8 bits.
1 3 Select paper Disabled Paper roll end, 1 5 Parity check Enabled Disabled sensors to output sensor enabled. paper end Paper roll near,1 6 Parity selection Even Odd. signals default end sensor, 1 7 Transmission speed See table below value of ESC c 3 enabled. 1 4 Undefined,Transmission speed bps bits per second 1 7 1 8. 38400 ON ON SW Function ON OFF,4800 OFF ON 2 1 Handshaking Receive Offline or.
BUSY condition buffer full Receive,9600 ON OFF,buffer full. 19200 OFF OFF,2 2 Do not change, SW Function ON OFF 2 3 Print density Low See Table A. 2 1 Handshaking Receive Offline or, BUSY condition buffer full Receive 2 5 Release Releases BUSY Releases BUSY. buffer full condition of when remain when remain,receive buffer ing receive ing receive. 2 2 Do not change BUSY If receive buffer capac buffer capac. 2 3 Print density See Table A buffer capacity ity reaches ity reaches. 2 4 Low power set to 4 KB 138 bytes 256 bytes, 2 5 Release Releases BUSY Releases BUSY 2 6 Do not change.
condition of when remain when remain 2 7, receive buffer ing receive ing receive 2 8 I F pin 31 reset Do not change. BUSY If receive buffer capac buffer capac,buffer capacity ity reaches ity reaches Table A. set to 4 KB 138 bytes 256 bytes,Print density low power SW 2 3 SW 2 4. 2 6 Do not change,Low power consumption mode ON ON. 2 7 I F pin 6 reset Enabled Disabled,1 Normal OFF OFF.
2 8 I F pin 25 reset Enabled Disabled,2 Medium ON OFF. 3 Dark OFF ON, All rights reserved No part of this publication may be reproduced stored in a retrieval system or transmitted in any. form or by any means electronic mechanical photocopying recording or otherwise without the prior written. permission of Seiko Epson Corporation No patent liability is assumed with respect to the use of the information. contained herein While every precaution has been taken in the preparation of this book Seiko Epson Corporation. assumes no responsibility for errors or omissions Neither is any liability assumed for damages resulting from the use. of the information contained herein, Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for. damages losses costs or expenses incurred by purchaser or third parties as a result of accident misuse or abuse of. this product or unauthorized modifications repairs or alterations to this product or excluding the U S failure to. strictly comply with Seiko Epson Corporation s operating and maintenance instructions. Seiko Epson Corporation shall not be liable against any damages or problems arising from the use of any options or. any consumable products other than those designated as Original Epson Products or Epson Approved Products by. Seiko Epson Corporation, EPSON and ESC POS are registered trademarks of Seiko Epson Corporation in the U S and other countries. NOTICE The contents of this manual are subject to change without notice. Copyright 2001 by Seiko Epson Corporation Nagano Japan. EMC and Safety Standards Applied,Product Name TM T88III TM T88IIIP.
Model Name M129C,FCC Compliance Statement, The following standards are applied only to the For American Users. printers that are so labeled EMC is tested using the This equipment has been tested and found to comply. EPSON power supplies with the limits for a Class A digital device pursuant. Europe CE marking to Part 15 of the FCC Rules These limits are designed. Safety EN 60950 to provide reasonable protection against harmful. North America EMI FCC ICES 003 Class A interference when the equipment is operated in a. Safety UL 1950 CSA C22 2 No 950 commercial environment. Japan EMC VCCI Class A This equipment generates uses and can radiate radio. frequency energy and if not installed and used in, Oceania EMC AS NZS 3548 Class B accordance with the instruction manual may cause. harmful interference to radio communications, WARNING Operation of this equipment in a residential area is. The connection of a non shielded printer interface likely to cause harmful interference in which case the. cable to this printer will invalidate the EMC user will be required to correct the interference at his. standards of this device You are cautioned that own expense. changes or modifications not expressly approved by. SEIKO EPSON Corporation could void your For Canadian Users. authority to operate the equipment This Class A digital apparatus complies with. Canadian ICES 003,CE Marking, The printer conforms to the following Directives and. Directive 89 336 EEC EN 55022 Class B,IEC 61000 4 2.
IEC 61000 4 3,IEC 61000 4 4,IEC 61000 4 5,IEC 61000 4 6. IEC 61000 4 11,Directive 90 384 EEC EN 45501,TM T88III User s Manual 1. Safety Precautions, This section presents important information intended to ensure. safe and effective use of this product Please read this section. carefully and store it in an accessible location, Shut down your equipment immediately if it produces smoke a strange. odor or unusual noise Continued use may lead to fire Immediately. unplug the equipment and contact your dealer or a SEIKO EPSON. service center for advice, Never attempt to repair this product yourself Improper repair work can.
be dangerous, Never disassemble or modify this product Tampering with this product. may result in injury or fire, Be sure to use the specified power source Connection to an improper. power source may cause fire, Do not allow foreign matter to fall into the equipment Penetration by. foreign objects may lead to fire, If water or other liquid spills into this equipment unplug the power cord. immediately and then contact your dealer or a SEIKO EPSON service. center for advice Continued usage may lead to fire. Do not connect cables in ways other than those mentioned in this manual. Different connections may cause equipment damage and burning. Be sure to set this equipment on a firm stable horizontal surface The. product may break or cause injury if it falls, Do not use in locations subject to high humidity or dust levels Excessive.
humidity and dust may cause equipment damage or fire. Do not place heavy objects on top of this product Never stand or lean. on this product Equipment may fall or collapse causing breakage and. possible injury, To ensure safety unplug this product before leaving it unused for an. extended period, Do not use aerosol sprayers containing flammable gas inside or around. this product Doing so may cause fire,2 TM T88III User s Manual. Caution Labels, Do not connect a telephone line to the drawer kick out connector. otherwise the printer and the telephone line may be damaged. The thermal head is hot,Caution label for autocutter blade.
The following items are included with the standard specification. printer If any item is damaged contact your dealer. Printer Paper roll,Power switch cover Connector cover. AC adapter,May not be included with your printer,Downloading Drivers Utilities and Manuals. Drivers utilities and manuals can be downloaded from one of the. following URLs, For customers in North America go to the following web site. http www epsonexpert com and follow the on screen,instructions. For customers in other countries go to the following web site. http www epson pos com, Select the product name from the Select any product pulldown.
Installing the Printer Horizontally or Vertically, You can install the printer horizontally on a flat surface with the. paper exit on top or vertically with the paper exit at the front by. hanging it on a wall using the optional WH 10 hanging bracket set. TM T88III User s Manual 3,Control Panel,FEED button. This button feeds paper,The POWER LED is on when the printer is on. This indicates an error,PAPER OUT LED, On indicates a paper near end or out Flashing indicates standby. Using the Power Switch Cover, If an accident occurs with the power switch cover PO.
attached unplug the power cord immediately,Continued use may cause fire or shock. The enclosed power switch cover ensures that,the power switch is not pressed accidentally To. use this cover install it as shown on the right,Attaching and Removing the Connector Cover. These instructions apply if a connector cover is packed with your. printer to protect your cables To attach it follow the steps below. 1 First connect all the cables The connector,cover has three possible cable exits on the. right left and back Remove the tab for the,exit you want to use by breaking it off with.
your fingers See the illustration on the right,Once you remove a tab you cannot replace it. 2 After removing the tab also remove any protruding plastic so. that the edge is smooth and does not damage the cables. 3 Position the two hooks on the connector cover so that they. hook the printer case as shown on the left below, 4 Push the connector cover down to click onto the printer case. 4 TM T88III User s Manual, To remove the connector cover turn the printer over insert a. flathead screwdriver under one hook and pry up the hook while. lifting the connector cover See the illustration on the right below. Repeat this step for the other side,screwdriver,the printer. Be careful not to damage the cables with the screwdriver. Installing the Paper Roll, 1 Press the button as shown on the left below to open the cover.
2 Remove any used paper roll core and insert the paper roll as. shown in the center below, 3 The correct direction of the paper is shown on the right below. 4 Pull out some paper as shown on the left below close the. cover and tear off the paper as shown on the right below. TM T88III User s Manual 5,Troubleshooting,No LEDs on the control panel. Check the power supply cable connections and the power outlet. ERROR LED on not flashing with no printing, If PAPER OUT is on the paper roll is not installed or is near the end. If PAPER OUT is off the printer cover is not closed properly. ERROR LED flashing with no printing and no paper jam. Printing stops if the head overheats and resumes when it cools. Turn the printer off and after 10 seconds back on,Removing Jammed Paper. Do not touch the print head because it can be very hot after printing. 1 Turn the printer off and press the cover open button. 2 Remove jammed paper reinstall the roll and close the cover. 3 If paper is caught in the cutter and you cannot open the printer. cover open the cutter cover as shown on the left below. 4 Turn the knob until you see a triangle in the opening as shown. on the right below This returns the cutter blade to the normal. position There is a label near the cutter to assist you. 5 Close the cutter cover, 6 Open the printer cover and remove the jammed paper.
6 TM T88III User s Manual,Cleaning the Print Head, After printing the print head can be very hot Be careful not to touch it. and to let it cool before you clean it Do not damage the print head by. touching it with your fingers or any hard object, Turn off the printer open the paper roll cover and clean the. thermal elements of the print head with a cotton swab moistened. with an alcohol solvent ethanol methanol or IPA, EPSON recommends cleaning the thermal head periodically. generally every 3 months to maintain receipt print quality. TM T88III Specifications,Printing method Thermal line printing. Dot density 180 dpi 180 dpi dots per 25 4 mm 1, Printing direction Unidirectional with friction feed.
Printing width 80 mm paper width model 72 mm 2 83 512 dot positions. 58 mm paper width model 50 8 mm 2 360 dot positions. Characters per line 80 mm paper width model Font A 42 Font B 56. default 58 mm paper width model Font A 30 Font B 40. Character spacing Font A 0 28 mm 01 2 dots Font B 0 28 mm 01 2 dots. Character size Standard Double height Double width Double width and Double height. Font A 1 41 3 39 mm 1 41 6 77 mm 2 82 3 39 mm 2 82 6 77 mm. Font B 0 99 2 40 mm 0 99 4 80 mm 1 98 2 40 mm 1 98 4 80 mm. Number of characters Alphanumeric characters 95 International characters 37. Extended graphics 128 11 pages including one space page. Print speed High speed, Approx 150 mm s 5 9 s max 47 2 lps max 3 18 mm 1 8 feed. 35 5 lps max 4 23 mm 1 6 feed at 24 V 28 C 82 F density level 1. Speed is adjusted automatically depending on the voltage applied and. head temperature, Low power Approx 16 5 lps 4 23 mm feed 1 6 70 mm s 2 76 s. Ladder bar code Approx 42 mm s approx 1 7 s, Paper feed speed Approx 150 mm s approx 5 9 s continuous paper feed. Line spacing default 4 23 mm 1 6, Character structure Font A 12 24 Font B 9 17 including 2 dot horizontal spacing. Font A is the default, Paper roll single ply Size 80 mm paper width model 79 5 mm 0 5 mm 3 13 0 02.
58 mm paper width model 57 5 mm 0 5 mm 2 26 0 02,Maximum outside diameter 83 mm 3 26. Paper roll spool diameter Inside 12 mm 0 47 Outside 18 mm 0 71. Thermal paper type Specified Nakagawa Seisakujo NTP080 80 NTP058 80. TM T88III User s Manual 3 English Caution Labels WARNING Do not connect a telephone line to the drawer kick out connector otherwise the printer and the telephone line may be damaged

Related Books