Porta Billing100 TM docs globalink us

Porta Billing100 Tm Docs Globalink Us-Free PDF

  • Date:18 Apr 2020
  • Views:21
  • Downloads:0
  • Pages:45
  • Size:2.21 MB

Share Pdf : Porta Billing100 Tm Docs Globalink Us

Download and Preview : Porta Billing100 Tm Docs Globalink Us


Report CopyRight/DMCA Form For : Porta Billing100 Tm Docs Globalink Us


Transcription:

PortaBilling100 for NexTone,Copyright notice disclaimers. Copyright c 2001 2006 PortaOne Inc All rights reserved. PortaBilling100 for NexTone October 2006,Maintenance Release 13. Please address your comments and suggestions to Sales Department. PortaOne Inc Suite 400 2963 Glen Drive Coquitlam BC V3B 2P7. Changes may be made periodically to the information in this publication. Such changes will be incorporated in new editions of the guide The. software described in this document is furnished under a license. agreement and may be used or copied only in accordance with the terms. thereof It is against the law to copy the software on any other medium. except as specifically provided in the license agreement The licensee may. make one copy of the software for backup purposes No part of this. publication may be reproduced stored in a retrieval system or transmitted. in any form or by any means electronic mechanical photocopied. recorded or otherwise without the prior written permission of PortaOne. The software license and limited warranty for the accompanying products. are set forth in the information packet supplied with the product and are. incorporated herein by this reference If you cannot locate the software. license contact your PortaOne representative for a copy. All product names mentioned in this manual are for identification. purposes only and are either trademarks or registered trademarks of their. respective owners, c 2000 2006 PortaOne Inc All rights Reserved www portaone com. PortaBilling100 for NexTone,Table of Contents,1 Solution Architecture 4. Concepts 5,2 NexTone Configuration 8,Configuring NexTone 9.
3 PortaBilling Configuration 14,PortaBilling100 Configuration 15. Call Routing 36,4 How to 37,How to manage the routing 38. 5 Troubleshooting 39, c 2000 2006 PortaOne Inc All rights Reserved www portaone com. PortaBilling100 for NexTone, This document provides information on setting up PortaBillling100 for. Nextone in conjunction with NexTone MSX so as to provide various. services such as VoIP traffic exchange,Where to get the latest version of this guide.
The hard copy of this guide is updated at major releases only and does. not always contain the latest material on enhancements occurring between. minor releases The online copy of this guide is always up to date and. integrates the latest changes to the product You can access the latest copy. of this guide at www portaone com resources documentation. Conventions,This publication uses the following conventions. Commands and keywords are given in boldface, Terminal sessions console screens or system file names are displayed. in fixed width font, Caution indicates that the described action might result in program. malfunction or data loss, NOTE Notes contain helpful suggestions about or references to materials not. contained in this manual, Timesaver means that you can save time by performing the action.
described in the paragraph, Tips provide information that might help you solve a problem. c 2000 2006 PortaOne Inc All rights Reserved www portaone com. PortaBilling100 for NexTone,1 Solution,Architecture. c 2000 2006 PortaOne Inc All rights Reserved www portaone com. PortaBilling100 for NexTone,PortaBilling for Nextone. PortaBilling100 for Nextone is a separate product based on. PortaBilling100 and providing all the standard billing features It also. includes all functionalities specific to Nextone e g special processing of. RADIUS attributes or a command line utility for CDR import. Architecture,Administrator,NE NE Resellers,Porta Billing Users. RADIUS Termination Termination,Partner A Partner B.
VoIP nodes, A node is an element of your VoIP network such as a gateway proxy. gatekeeper and so on A node, participates in the call flow passes a call through itself. communicates with the billing in order to determine whether a. particular call should be allowed or not, provides accounting information to the billing after the call is. completed so the call can be charged, NexTone MSX is a typical VoIP node it accepts incoming calls performs. authorization in the billing sends calls to the remote gateway for. termination and finally delivers accounting records to the billing. RADIUS server, In order to communicate with external entities such as VoIP gateways the.
RADIUS protocol is used VoIP nodes serve as radius clients and. c 2000 2006 PortaOne Inc All rights Reserved www portaone com. PortaBilling100 for NexTone, PortaBilling100 serves as a radius server The client sends a request set of. attributes to the server and the server replies There are three types of. 1 Authentication the VoIP node has to determine whether a certain. account the account ID passed in the User Name attribute is valid. and is allowed to use the service Billing replies with either a rejection. or an acknowledgement including optional attributes such as h323. credit amount available funds, 2 Authorization the VoIP node has to determine whether an account. is allowed to make a call to a specific destination Billing replies with. either a rejection or an acknowledgement including optional. attributes such as h323 credit time maximum allowed call duration. 3 Accounting the VoIP node sends information about the completed. call and the billing replies with a confirmation that it has been. processed successfully,NexTone MSX, NexTone MSX is an advanced VoIP session border controller and switch. incorporating H323 and SIP proxy as well as an H323 SIP protocol. NexTone PortaBilling100 dialogue, NexTone sends requests to the billing so as to obtain information for the. following actions, Registration A new SIP UA tries to register to the proxy.
NexTone sends an authentication request and the endpoint is. registered upon successful authentication, Call authorization One of the endpoints tries to make an. outgoing call NexTone sends an authorization request to the. billing in order to check whether this account is allowed to make a. call to that destination and what is the maximum allowed credit. NOTE Currently call authorization is only available for incoming SIP calls. Accounting When the call is completed successfully or not. NexTone sends an accounting request to the billing so that the. account can be charged for this call, NexTone MSX uses several PortaBilling specific RADIUS attributes in. addition to the standard Cisco VSA set including, c 2000 2006 PortaOne Inc All rights Reserved www portaone com. PortaBilling100 for NexTone, h323 ivr out PortaBilling UserName NNN specifies the. account ID NNN to be used for authorization or call charging. h323 ivr out PortaBilling Ignore Password YES switches. off password validation for IP based or ANI based services. Required Nextone version, PortaBilling100 for Nextone requires the following versions of NexTone.
for successful operations,MSX Version 4 0c3 9 or later. iView version 4 0c5 or later, Earlier versions of NexTone MSX do not support special RADIUS. attributes and therefore cannot be used for real time billing although you. can still import CDRs in off line mode, c 2000 2006 PortaOne Inc All rights Reserved www portaone com. PortaBilling100 for NexTone,Configuration, c 2000 2006 PortaOne Inc All rights Reserved www portaone com. PortaBilling100 for NexTone,Configuring NexTone,iServer configuration.
1 Fill in the Billing form in the iServer configuration. o Billing Type Choose Cisco Prepaid, o Primary Server IP address of the PortaBilling100 master. o Primary Secret RADIUS secret key for this Nextone node. assign a value then make sure this same value is entered in the. Nextone node s configuration in PortaBilling, c 2000 2006 PortaOne Inc All rights Reserved www portaone com. PortaBilling100 for NexTone,server cfg, To identify the PortaOne billing server there is a new configuration. parameter called use ip ani auth under billing in the server cfg file It. has not yet been merged into the latest release of iView. billing ciscoprepaid,firstauth NextoneUser Nextone. secondauth NextoneUserA Nextone,use ip ani auth on.
The last parameter activates use of the PortaBilling Username attribute. so it will be populated with either an ANI phone number or the IP. address of the remote endpoint,Configuration of authentication modes. NexTone supports three main authentication modes, SIP digest authentication This is a global mode if activated it. applies to all endpoints, Authentication by remote IP address In this case for every. incoming call NexTone passes signaling of the remote endpoint to. the billing as an account ID This mode can be applied to specific. Authentication by ANI number In this case for every incoming. call NexTone extracts ANI CLI data from the call information. and passes it to the billing as an account ID This mode can be. applied to specific endpoints, NOTE Currently NexTone MSX supports real time call authentication authorization. for incoming SIP calls only For H323 calls only postpaid billing is available. If you wish to use IP based authentication for some calls and ANI based. authentication for others from the same endpoint you can configure the. authentication mode to be dynamically chosen based on the destination. number For instance customers who are authenticated by a remote IP. address must append 1234 to the destination number when sending a. call to your NexTone Similarly customers authenticated by an ANI. number will use a different prefix e g 4567 NexTone will analyze the. DNIS CLD data in the incoming call and apply the corresponding. authentication method, c 2000 2006 PortaOne Inc All rights Reserved www portaone com.
PortaBilling100 for NexTone,Activating SIP digest authentication mode. In the iView configuration activate RADIUS authentication. Configuring an authentication mode for an endpoint. In order to activate ANI based authentication billing execute the. following command on your NexTone server,cli iedge edit endpoint name 0 anibasedauth yes. In order to activate IP based authentication billing execute the following. command on your NexTone server, c 2000 2006 PortaOne Inc All rights Reserved www portaone com. PortaBilling100 for NexTone,cli iedge edit endpoint name 0 anibasedauth no. By default IP based authentication is applied,Configuring dynamic authentication mode for an.
You should create two uports for the same endpoint and a separate. calling plan for each uport In the example below we assume that you will. use 1234 for IP based authentication and 4567 for ANI based. authentication, c 2000 2006 PortaOne Inc All rights Reserved www portaone com. PortaBilling100 for NexTone, Next assign the authentication mode for each endpoint. cli iedge edit endpoint 1 name 0 anibasedauth no,cli iedge edit endpoint 1 name 0 anibasedauth yes. c 2000 2006 PortaOne Inc All rights Reserved www portaone com. PortaBilling100 for NexTone,3 PortaBilling,Configuration. c 2000 2006 PortaOne Inc All rights Reserved www portaone com. PortaBilling100 for NexTone Maintenance Release 13 TM PORTA ONE www portaone com Porta Billing100 TM

Related Books