Owner s Manual Rotel

Owner S Manual Rotel-Free PDF

  • Date:15 Sep 2020
  • Views:3
  • Downloads:0
  • Pages:8
  • Size:369.40 KB

Share Pdf : Owner S Manual Rotel

Download and Preview : Owner S Manual Rotel


Report CopyRight/DMCA Form For : Owner S Manual Rotel


Transcription:

RISK OF ELECTRIC SHOCK WARNING, DO NOT OPEN There are no user serviceable parts inside Refer all servicing to. CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO,qualified service personnel. NOT REMOVE COVER NO USER SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL WARNING. To reduce the risk of fire or electric shock do not expose the unit. to moisture or water Do not allow foreign objects to get into the. APPLICABLE FOR USA CANADA OR WHERE, APPROVED FOR THE USAGE enclosure If the unit is exposed to moisture or a foreign object. gets into the enclosure immediately disconnect the power cord. CAUTION TO PREVENT ELECTRIC SHOCK MATCH WIDE BLADE. from the wall Take the unit to a qualified service person for in. OF PLUG TO WIDE SLOT INSERT FULLY,spection and necessary repairs.
ATTENTION POUR EVITER LES CHOCS ELECTRIQUES,INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE. DANS LA BORNE CORRESPONDANTE DE LA PRISE ET Read all the instructions before connecting or operating the component Keep. POUSSER JUSQU AU FOND this manual so you can refer to these safety instructions. Heed all warnings and safety information in these instructions and on the. product itself Follow all operating instructions, This symbol is to alert the user to the Clean the enclosure only with a dry cloth or a vacuum cleaner. presence of uninsulated dangerous, voltages inside the product s enclosure Keep the ventilation inlets on the unit unobstructed For example do not place. that may constitute a risk of electric shock the unit on a bed sofa rug or similar surface that could block the ventilation. slots If the component is placed in a bookcase or cabinet there must be suffi. cient clearance around the unit and ventilation of the cabinet to allow proper. This symbol is to alert the user to important cooling. operating and maintenance service, Keep the component away from radiators heat registers stoves or any other. instructions in this manual and literature, accompanying the product appliance that produces heat.
The unit must be connected to a power supply only of the type and voltage. specified on the rear panel of the unit, Connect the component to the power outlet only with the supplied power sup. ply cable or an exact equivalent Do not modify the supplied cable in any way. Do not attempt to defeat grounding and or polarization provisions The cable. should be connected to a 2 pin polarized wall outlet matching the wide blade. of the plug to the wide slot of the receptacle Do not use extension cords. Do not route the power cord where it will be crushed pinched bent at severe. angles exposed to heat or damaged in any way Pay particular attention to the. power cord at the plug and where it exits the back of the unit. The power cord should be unplugged from the wall outlet if the unit is to be left. unused for a long period of time, Immediately stop using the component and have it inspected and or serviced. by a qualified service agency if,The power supply cord or plug has been damaged. Objects have fallen or liquid has been spilled into the unit. The unit has been exposed to rain,The unit shows signs of improper operation. The unit has been dropped or damaged in any way,Place the unit on a fixed level surface strong.
enough to support its weight Do not place it on,a moveable cart that could tip over. Figure 1 Controls and Connections,DTS SURROUND ADAPTOR RDA 986. POWER DTS SIGNAL,WARNING TO REDUCE THE RISK OF FIRE. OR ELECTRICAL SHOCK DO NOT EXPOSE,RISK OF ELECTRIC SHOCK. THIS EQUIPMENT TO RAIN OR MOISTURE DO NOT OPEN DTS SURROUND ADAPTOR. AVIS RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR,MODEL NO RDA 986.
FRONT REAR POWER CONSUMPTION 55W,L CENTER RDA 986,R SUBWOOFER. INPUT OUTPUT,5 6 7 8 9 10 11 12,Figure 2 Basic Wiring Connections. DVD PLAYER,AUDIO OUTPUT VIDEO OUTPUT,RIGHT COMPOSITE. ROTEL RDA 986,WARNING TO REDUCE THE RISK OF FIRE,OR ELECTRICAL SHOCK DO NOT EXPOSE. RISK OF ELECTRIC SHOCK, THIS EQUIPMENT TO RAIN OR MOISTURE DO NOT OPEN DTS SURROUND ADAPTOR.
AVIS RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR,MODEL NO RDA 986. FRONT REAR POWER CONSUMPTION 55W,L CENTER RDA 986,R SUBWOOFER. INPUT OUTPUT,SURROUND SOUND PROCESSOR,DIGITAL INPUT. 5 1 CH INPUT OPTICAL,DIGITAL SURROUND SOUND,SPEAKER CONFIGURATION PROCESSOR. COAXIAL MODEL NO RSP 975,CENTER FRONT REAR SUB POWER CONSUMPTION 22W.
SMALL MONITOR,SMALL SMALL ON COAX 1,LARGE LARGE OFF. SWITCHED 800W MAX, TUNER CD TAPE AUX VIDEO 1 VIDEO 2 VIDEO 3 VIDEO 4 FRONT REAR CENTER. RISK OF ELECTRIC SHOCK,L DVD DO NOT OPEN,AVIS RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR. WARNING TO REDUCE THE RISK OF FIRE,OR ELECTRICAL SHOCK DO NOT EXPOSE. IN OUT IN OUT IN OUT IN OUT SUB THIS EQUIPMENT TO RAIN OR MOISTURE. DTS SURROUND ADAPTOR RDA 986, Figure 3 Wiring Connections with Second Surround Adaptor.
DVD PLAYER,AUDIO OUTPUT VIDEO OUTPUT,RIGHT COMPOSITE. ROTEL RDA 986,WARNING TO REDUCE THE RISK OF FIRE,OR ELECTRICAL SHOCK DO NOT EXPOSE. RISK OF ELECTRIC SHOCK, THIS EQUIPMENT TO RAIN OR MOISTURE DO NOT OPEN DTS SURROUND ADAPTOR. AVIS RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR,MODEL NO RDA 986. FRONT REAR POWER CONSUMPTION 55W,L CENTER RDA 986,R SUBWOOFER.
INPUT OUTPUT,RDA 975 DOLBY DIGITAL DECODER,FRONT REAR. DIGITAL INPUTS,DOLBY SURROUND ADAPTOR,L CENTER MODEL NO RDA 975. POWER CONSUMPTION 55W,COAX 1 COAX 2 OPTICAL,R SUBWOOFER RDA 975. SURROUND SOUND PROCESSOR, 5 1 CH INPUT SURROUND HI PASS FRONT HI PASS CENTER MODE. CAUTION WARNING TO REDUCE THE RISK OF FIRE PHANTOM. RISK OF ELECTRIC SHOCK OFF ON OFF ON NORMAL WIDE,DO NOT OPEN OR ELECTRICAL SHOCK DO NOT EXPOSE.
THIS EQUIPMENT TO RAIN OR MOISTURE, AVIS RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR 500W MAX. NORMAL LARGE THX,CENTER SPEAKER, INPUT OUTPUT TV MONITOR S VIDEO INPUT S VIDEO OUTPUT. TUNER LD 1 2 3 1 2 3,DBS VIDEO 3,C S S C RCA SURROUND SOUND PROCESSOR. OUT MODEL NO RSP 980,POWER CONSUMPTION 22W,2 3 TAPE MONITOR. OUT FRONT REAR CENTER,SUBWOOFER REMOTE EXT,A Few Precautions.
Contents Please read this manual carefully In addition to installation and. operating instructions it provides valuable information on various. Getting Started 3 RDA 986 system configurations as well as general information. that will help you get optimum performance from your system. A Few Precautions 3, Please contact your authorized Rotel retailer for answers to any. Placement 3 questions you might have In addition all of us at Rotel welcome. AC Power and Control 3 your questions and comments. AC Power Input 12 3 Save the RDA 986 shipping carton and all enclosed packing mate. Power Switch 1 and Power Indicator 2 4 rial for future use Shipping or moving the RDA 986 in anything. Digital Signal Connections 4 other than the original packing material may result in severe dam. age that is not covered by the warranty Be sure to keep the origi. Digital Inputs 5 and 7 4 nal sales receipt It is your best record of the date of purchase. Digital Input Selector Switch 6 4 which you will need in the event warranty service is required. Coaxial Digital Output 8 4,DTS Indicator 3 and Signal Indicator 4 4. Analog Signal Connections 4 Use common sense when placing the RDA 986 in a cabinet or. when stacking other equipment Make sure that the shelf or cabi. 25 pin Analog Output 10 4, net can support its weight Do not stack heavy components on top. RCA Analog Outputs 11 4 of the RDA 986 Avoid placing the unit where it may be subject to. 25 pin Analog Input 9 4 excessive heat such as on top of a large power amplifier or near a. heat register For best performance avoid placing the unit where. Specifications 5 it may be subject to vibration such as near a speaker. AC Power and Control,AC Power Input 12, Getting Started Your RDA 986 is configured for the proper AC voltage in the coun. try where you purchased it either 115 volts or 230 240 volts The. Thank you for purchasing the Rotel RDA 986 DTS Surround AC line configuration is noted on a decal on the back panel. Adaptor The RDA 986 is a high quality outboard digital processor. for decoding discrete DTS 5 1 channel surround sound encoded. Note Should you move your unit to another country it may be. Laser Discs and Digital Video Discs The RDA 986 accepts an en. possible to reconfigure it for use on a different line voltage Do not. coded DTS digital signal decodes it and sends six discrete ana. attempt to perform this conversion yourself Opening the enclo. log surround sound audio signals to the 5 1 channel input on a. sure of the RDA 986 exposes you to dangerous voltages Consult a. surround sound processor or other system controller With its pre. qualified service person or the Rotel factory service department. mium components Balanced Design and robust construction the. for information, RDA 986 will provide years of enjoyment in your system.
The RDA 986 is simple to operate Other than a power switch The RDA 986 should be plugged directly into a 2 pin polarized wall. there are no front panel controls or switches The unit senses outlet or into the switched outlet on another component in your. when a DTS signal is present and engages the decoding circuitry audio system Do not use an extension cord. automatically, Be sure the power switch on the front panel of the RDA 986 is. The RDA 986 also provides pass through digital outputs and ana turned off Then connect the supplied power cord to the AC. log inputs to provide full flexibility in a number of system configu power receptacle on the rear of the unit and the AC power outlet. rations For example a second outboard decoder such as Dolby. Digital can be connected to the analog inputs of the RDA 986 If you are going to be away from home for an extended period of. When a DTS signal is present at the digital input the RDA 986 will time such as a month long vacation it is a sensible precaution to. decode it and send the signal to the outputs When no DTS signal unplug your RDA 986 as well as other audio and video compo. is present the RDA 986 will pass the signal from the analog inputs nents while you are away. to the outputs,DTS SURROUND ADAPTOR RDA 986,Power Switch 1 and Power Indicator 2. The power switch is located on the front panel of your RDA 986. Analog Signal Connections, Surround Adaptor To turn the unit on push the switch in The LED. indicator above the switch will light indicating that the unit is The RDA 986 has 5 1 channel analog output connections for send. turned on To turn the RDA 986 off push the button again and re ing decoded DTS information six discrete channels left front. turn it to the out position right front center left rear right rear and subwoofer to the sur. round processor or system controller In addition the RDA 986. features a 5 1 channel analog pass through input which can be. used to accept a decoded 5 1 channel signal from another out. board decoder such as Dolby Digital to the surround processor. Digital Signal Connections thus simplifying connections in an elaborate system. The RDA 986 features two standard digital inputs optical or co 25 pin Analog Output 10. axial which receive a digital data stream from a DTS compatible. LaserDisc or DVD player In addition a pass through digital output The most convenient analog output connection is the rear panel. connector coaxial can be used to send the raw digital data 25 pin connector This is a standard DB 25 connector which car. stream to another processor such as a Dolby Digital decoder ries all six channels of decoded analog signal in a single cable If. you are using a surround processor which has a matching DB 25. Digital Inputs 5 and 7, input such as all Rotel surround processors this will provide a. convenient simplified output connection Simply connect the out. The RDA 986 s digital inputs accept a digital signal from your put to the matching 5 1 channel input on your surround processor. LaserDisc or DVD player Two types of digital inputs are available using a standard female to male DB 25 audio connector. an optical input connection and a 75 ohm coaxial input connec. tion Select the type of connection that best matches the output RCA Analog Outputs 11. connector on your video disc player or other source component. using either a standard optical digital cable or a standard 75 ohm The RDA 986 also provides six RCA output connectors for use with. coax digital cable surround sound processors lacking a DB 25 input These outputs. provide exactly the same analog output signals as the DB 25 out. Digital Input Selector Switch 6, put except that connecting them requires the use of six standard.
RCA to RCA audio cables If you use the RCA outputs make sure. A two position switch located between the digital inputs selects that you connect the signal properly the LEFT FRONT output on. the appropriate digital input connector either optical or coax If the RDA 986 to LEFT FRONT input on the surround processor etc. you connect your video disc player to the RDA 986 s optical input. place this switch in the left position labeled OPTI If you use the 25 pin Analog Input 9. coax input slide this switch to the right position labeled COAX. In many systems the RDA 986 will be the only outboard surround. Coaxial Digital Output 8, sound decoder therefore the only input connection will be con. necting a DTS source component to the digital inputs described. dts surround adaptor model no rda 986 power consumption 55w in rda 986 opti coax digital caution risk of electric shock do not open avis risque de choc electrique ne pas ouvrir coax 2 dolby surround adaptor model no rda 975 power consumption 55w rda 975 rotel rda 986 surround sound processor rda 975 dolby digital decoder output 2

Related Books