ONE LINE DOES IT ALL PUT NORTON TO THE TEST

One Line Does It All Put Norton To The Test-Free PDF

  • Date:22 Sep 2020
  • Views:1
  • Downloads:0
  • Pages:8
  • Size:2.46 MB

Share Pdf : One Line Does It All Put Norton To The Test

Download and Preview : One Line Does It All Put Norton To The Test


Report CopyRight/DMCA Form For : One Line Does It All Put Norton To The Test


Transcription:

ACRYLIC FOR METAL BONDING, 2 500 PSI Lap shear strength makes acrylic adhesives one of the strongest available It remains. flexible and performs well at extremely low temperatures Acrylic is the best choice for metal to metal. bonding For optimal results grind the panel to bare metal. GUARANTEED Norton SpeedGrip acrylic adhesives provide a lifetime corrosion and performance warranty. PRODUCTIVE Reduce repair time versus welding seals and bonds in one application and de clamp in as little as 90 minutes. PRECISE CONTROL Glass bead technology allows for correct panel spacing and perfect bond control. VERSATILE Bonds a variety of substrates automotive grade cold rolled steel galvanized steel e coat aluminum and stainless steel with minimal. surface preparation,Metal Door Skin Bonding Adhesive Metal Panel Weld. Two part acrylic 2 1 for panel bonding of Bonding Adhesive. door panels other body sheet metal steel Two part acrylic 2 1 for panel bonding and. and aluminum weld bonding of quarter panels rear body. Bonds door panels to door frames panels roof panels door panels van side panels. without welding and outer truck bed panels on bare metals. Guaranteed corrosion protection including aluminum. Long work time 75 minutes for bonding,large areas,Guaranteed corrosion protection. Perfect for high temperatures, Meets Ford WSS M2G410 A2 and Meets Chrysler MS CD507. GM6449G Metal Bonding Specifications Metal Bonding Specification. PART WORK TIME CLAMP TIME CURE TIME PART WORK TIME CLAMP TIME CURE TIME. 63642506419 45 minutes 1 1 2 hours 8 hours 63642506420 75 minutes 2 1 2 hours 8 hours. Applications Applications, Bonding of patch panels and trailer side wall sections etc Bonding of exterior body panels including door panels quarter.
Bonding of exterior body panels including door panels quarter panels roof panels etc when an extended working time is needed. panels roof panels etc Can be used to weld and or rivet bond structural or non structural. Can be used to weld and or rivet bond structural or non structural body panels Follow OEM procedures. body panels Follow OEM procedures, After clamping wipe any excess adhesive off the panel while wet. Times will increase as temperature decreases,Times shown above are at 70 F 21 C. SpeedGrip adhesives SHOULD NOT be used for bonding structural components such as rails pillars rocker panels core supports etc If in doubt as to what is a structural component contact. the vehicle manufacturer, RESISTANCE SPOT WELDING Norton recommends resistance welding through Metal Bonding Adhesives in a wet or cured state with no burn back. MIG WELDING Norton Adhesive CANNOT be in the weld area or burn back will occur Norton recommends at least one inch clearance from the weld site A one inch clearance will keep the. adhesive from contaminating the weld site while positioning the panel on the vehicle If using weld through primer make sure to cover weld area on vehicle and replacement panel but do not. contaminate bond line areas,www nortonabrasives com. URETHANE FOR PLASTIC REPAIR, Urethane adhesives provide 3 500 PSI Lap shear strength and perform well.
at higher temperatures Urethanes work with most repair applications and are. sandable They are recommended for most plastic repair jobs. DURABLE Stronger than the original plastics,100 SOLIDS No shrinkage. SANDS GREAT Undetectable feather edge,FAST Sandable in as little as 5 minutes. Adhesion Promoter, No need to identify plastic type just simply apply to all plastics once no need to re apply Allow for a 10 minute flash time. PART DESCRIPTION SIZE,63642504625 Aerosol 333 g,Applications. No plastic identification required,Use with urethane adhesives on plastic parts.
SpeedGrip 45 seconds SpeedGrip 1 minute, Two part urethane 1 1 used for structural and Two part urethane 1 1 used for structural and. cosmetic repairs of all plastic bumpers including cosmetic repairs of all plastic bumpers including. TPE TPO TEO PP and ABS TPE TPO TEO PP and ABS, Perfect to join pieces which cannot be clamped One product for all structural and cosmetic. in place simply hold the pieces in place for repairs on bumpers. 20 seconds Easy to sand,Will not lift or roll up, PART SIZE OPEN TIME WORK TIME HANDLING TIME SANDING TIME PART OPEN TIME WORK TIME HANDLING TIME SANDING TIME PAINT TIME. 63642504647 220 ml 30 seconds 45 seconds 2 1 2 minutes 5 7 minutes 63642504615 1 minute 1 1 2 minutes 7 minutes 12 20 minutes 1 hour. 63642597122 50 ml 30 seconds 45 seconds 2 1 2 minutes 5 7 minutes. 2 000 PSI Lap shear strength,Applications Applications. Repairs bumper tabs trim and small plastic parts Bonds plastic parts Repairs bumper tabs trim and small plastic parts Bonds plastic parts. to plastic and coated metals to plastic and coated metals. Repairs tears and holes on bumpers trim moldings etc Repairs tears and holes on bumpers trim moldings etc. Times will increase as temperatures decrease,Times shown above are at 70 F 21 C.
Full cure time is 24 hours but this may be accelerated with heat. SpeedGrip adhesives SHOULD NOT be used for bonding structural components such as rails pillars rocker panels core supports etc If in doubt as to what is a structural component contact. the vehicle manufacturer, DO NOT APPLY POLYESTER BASED FILLERS POLYESTER PUTTY FILLER TO ANY URETHANE SPEEDGRIP ADHESIVE IF POLYESTER BASED FILLER MUST BE USED THE URETHANE. SPEEDGRIP MUST BE SEALED WITH ONE OF THE FOLLOWING PRIMERS 2 part epoxy or 2 part urethane Or you can use Skim Plus 06400 to finish the repair directly over the SpeedGrip. All are 220 ml except 97122 which is 50 ml,www nortonabrasives com. URETHANE FOR PLASTIC REPAIR CONT,SpeedGrip 5 minutes SpeedGrip 15 minutes. Two part urethane 1 1 adhesive used for Two part urethane 1 1 adhesive used for. structural and cosmetic repairs of all plastic installation of hood panels roof panels fenders. bumpers bumper tabs emblems door trims fender liners fairings spoilers wind deflectors. interior and exterior plastic repairs and cosmetic cab extenders ground effects headlamp buckets. repairs including TPE TPO TEO PP and and other body panels For bonding fiberglass. ABS and can also be used to bond SMC or SMC carbon fiber and other plastics to itself and. fiberglass panels to primed metal, One product for all structural and cosmetic One product for all structural and cosmetic. repairs on bumpers repairs on bumpers, Easy to sand to a feather edge Work window allows for larger repairs.
Good for elevated temperatures Perfect for elevated temperatures. Will not lift or roll up Easy to sand to a feather edge. Accelerate cure with heat 3 min 140 F Accelerate cure with heat 10 min 140 F. PART OPEN TIME WORK TIME HANDLING TIME SANDING TIME PAINT TIME PART OPEN TIME WORK TIME HANDLING TIME SANDING TIME PAINT TIME. 63642504616 5 minutes 7 minutes 15 minutes 45 minutes 2 hours 63642504617 15 minutes 20 minutes 45 minutes 90 minutes 3 hours. Applications Applications, Repairs bumper tabs trim and small plastic parts Bonds plastic parts Bonds composite materials to itself or to coated metals. to plastic and coated metals, Repairs tears and holes on bumpers trim moldings etc. EPOXY FOR PANEL BONDING,Impact Toughened Structural Adhesive. Two component epoxy structural adhesive for use in automotive bonding applications Adheres to a wide variety of properly. prepared substrates including steel and aluminum The Impact Toughened Structural Adhesive has an extended work time for large. applications but can be accelerated with applied heat. Optimum impact strength than traditional structural adhesives. Can be used in weld bonded or rivet bonded OEM applications. To view a step by step video for, Outstanding performance in extreme temperatures 40 F through 140 F Impact Touchened go to. Consistent bond line thickness contained by glass beads http nortonsga us applyspeedgr. GM Impact resistant,joint repair, PART WORK TIME CLAMP TIME SANDING TIME PAINT CURE TIME.
63642506427 90 minutes 10 hours N A N A,Applications. Repair structural components reinforcements and body rails. For use on outer body panels only Not for use on structural components such as pillars frame rails core supports or rocker panels on unibody vehicles. Times will increase as temperatures decrease Times shown above are at 77 F 25 C Full cure time is 24 hours but this may be accelerated with heat. RESISTANCE SPOT WELDING Norton recommends resistance welding through Multi Bonding Adhesives in a wet state only with little to no burn back. MIG WELDING Multi Bonding Adhesive CANNOT be in the weld area or burn back will occur Norton recommends at least one inch clearance from the weld site A one inch clearance will keep. the adhesive from contaminating the weld site while positioning the panel on the vehicle If using weld through primer make sure to cover weld area on vehicle and replacement panel but do not. contaminate bond line areas,www nortonabrasives com. EPOXY FOR PANEL BONDING CONT,Epoxy Panel Bonding Adhesive. Two part epoxy adhesive designed to bond SMC FRP fiberglass steel and. aluminum auto parts and body panels to each other and to metal frames. no primer required,To view a step by step video for. Minimal odor,Glass beads for proper spacing,Structural Plastic Repair go to.
http nortonsga us structuralspeedgr,Easy to sand formulation. Paintable To view a step by step video for, Seals and bonds in one step Cosmetic Plastic Repair go to. http nortonsga us plasticspeedgr, PART WORK TIME CLAMP TIME SANDING TIME PAINT CURE TIME. 63642506418 30 minutes 2 hours 3 hours 24 hours,63642506421 90 minutes 4 hours 8 hours 24 hours. EPOXY FOR SMC PLASTIC REPAIR, Epoxy adhesives work well at both high and low temperatures have shear strength of 3 000 PSI and.
perform well filling gaps Ideal for undetectable SMC repairs plus they can be used with most other. collision repair applications, Plastic Repair Skim Plus SMC Fiberglass Repair Adhesive. Two part epoxy 1 1 used to repair most plastic Two part epoxy 1 1 used for structural and. parts including bumper covers and other plastic cosmetic repair of all types of rigid body plastics. body panels including PP fiberglass Metton such as SMC GTX fiberglass Metton and. Telene SMC TEO and urethane Formulated to carbon fiber. finish the front side of flexible repairs or used over One product for all rigid body panels. the top of urethane adhesives,Sands very easily,Incredibly easy to sand in 20 minutes or less. Will not lift or roll up,No plastic ID required,No read through and zero shrinkage. No adhesion promoter needed,Ford SMC panel repair,Mix with spreader GM SMC panel repair. PART WORK TIME CLAMP TIME SANDING TIME PAINT TIME CURE TIME PART WORK TIME CLAMP TIME SANDING TIME PAINT TIME CURE TIME. 63642506400 1 2 minutes 15 20 minutes 60 minutes 60 minutes 63642506417 40 minutes 3 hours 10 min 10 minutes 60 minutes 60 minutes. Times will increase as temperatures decrease Times shown above are at 70 F 21 C unless 180 F 180 F 180 F 180 F. noted otherwise Times will increase as temperatures decrease Times shown above are at 70 F 21 C unless. noted otherwise,Repair and Filler,Two part epoxy 1 1 used for cosmetic repairs on.
both flexible and rigid parts Adhesion Promoter,must be used on plastic parts Work time is 5. minutes and it can sanded in 15 30 minutes It,sands easily and feathers well. Incredibly easy to sand in 30 minutes or less,Use adhesion promoter on plastic parts. Feathers well,Mix with spreader, PART WORK TIME CLAMP TIME SANDING TIME PAINT TIME CURE TIME. 63642506412 5 minutes 15 30 minutes 15 30 minutes 6 8 hours. Times will increase as temperatures decrease Times shown above are at 70 F 21 C unless. noted otherwise,www nortonabrasives com,SPEEDGRIP SEAM SEALERS.
Seam Sealer Seam Sealer Self Leveling, Two part epoxy 1 1 used to seal interior and Two part epoxy 1 1 is formulated for use on. exterior seams joints and voids drip rails trunk seams and roof channels. Will not shrink harden or crack Will not shrink harden or crack. Retains flexibility Retains flexibility, For use on vertical or horizontal seams For use on horizontal seams. PAINTABLE IN PAINTABLE IN,30 MIN 30 MIN, PART WORK TIME SANDING PAINT TIME FULL CURE PART WORK TIME SANDING PAINT TIME FULL CURE. 63642597120 8 10 minutes 30 minutes 2 hours 63642597121 5 10 minutes 30 minutes 2 hours. Times will increase as temperatures decrease Times shown above are at 70 F 21 C Times will increase as temperatures decrease Times shown above are at 70 F 21 C. Seam Sealer Controlled Flow Bare Metal Epoxy Seam Sealer. Two part epoxy 1 1 is a permanently Two part epoxy 1 1 non sag high solid epoxy. flexible epoxy sealer that features a controlled designed where a fast setting and fast paint time. leveling characteristic sealer is desired, Formulated for use on horizontal and sloped Faster paint time than the traditional sealers. areas trunk and roof seams drip rails and,core supports Extrudes easily with excellent.
tooling characteristics,Paintable after 30 minutes. No shrinkage,PAINTABLE IN PAINTABLE IN,30 MIN 45 MIN. PART WORK TIME SANDING PAINT TIME FULL CURE PART WORK TIME SANDING PAINT TIME FULL CURE. 63642506402 5 10 minutes 30 minutes 2 3 hours 63642506398 5 10 minutes 45 minutes 6 8 hours. Times will increase as temperatures decrease Times shown above are at 70 F 21 C Times will increase as temperatures decrease Times shown above are at 70 F 21 C. ONE LINE DOES IT ALL PUT NORTON TO THE TEST Whether you re working on steel aluminum SMC FRP fiberglass rigid plastic PRODUCTIVE Reduce repair time versus welding seals and bonds in one application and de clamp in as little as 90 minutes PRECISE CONTROL Glass bead technology allows for correct panel spacing and perfect bond control VERSATILE Bonds a variety of substrates

Related Books