MDEK1001 Quick Start Guide decawave com

Mdek1001 Quick Start Guide Decawave Com-Free PDF

  • Date:23 Nov 2020
  • Views:1
  • Downloads:0
  • Pages:8
  • Size:1.26 MB

Share Pdf : Mdek1001 Quick Start Guide Decawave Com

Download and Preview : Mdek1001 Quick Start Guide Decawave Com


Report CopyRight/DMCA Form For : Mdek1001 Quick Start Guide Decawave Com


Transcription:

IN THE BOX,QUANTITY ITEM DESCRIPTION,Each RTLS unit contains a DWM1001. DEV development board with a DWM1001,12 RTLS units. Each RTLS unit can be configured as an,anchor a tag or a listener. For re programming the RTLS unit with,1 1 m USB cable. new different firmware,4 Right angled USB connector.
Options for powering mounting RTLS, 8 Adhesive Pads units configured to act as anchors. 1 Quick start guide Read this first,ON DECAWAVE S WEBSITE www decawave com. Decawave DRTLS Manager Download and install on your Android. Android application file apk for configuration 6 0 or 7 0 tablet. and visualisation,Documentation for Including, MDEK1001 evaluation kit MDEK1001 System User Manual. DWM1001 DEV development board Firmware API Guides,DWM1001 module Hardware datasheets. ALSO REQUIRED NOT INCLUDED, RTLS units can be powered via USB mains power supplies.
or batteries inside the enclosures, It is recommended to power anchors by USB mains powered. power supplies or high capacity USB battery packs,Power sources for. the RTLS units Battery 3 7V RCR123a or 16340 rechargeable. Note Some USB battery packs shutdown when connected to. the low current tags Battery packs with a torch function often. stay on when the tag sleeps, Tablet running Android 6 0 or 7 0 e g Samsung Galaxy Tab. Android Tablet S2, Use tall tripods or wall mountings to mount the anchors high. Tripods Stands,above tags to reduce non line of sight conditions.
Sticky Tape, PC Used to directly connect a PC to an RTLS unit to log location. data or send commands to that unit,Prepare the Anchors. 1 Select 4 RTLS units to be anchors, 2 Mount them high on walls or tripods preferably above head height. 3 Ensure they are all at the same height, 4 Arrange them approximately in a rectangular shape. 5 Power them using USB mains power supplies or USB battery packs. Prepare the Tags,1 Select 1 RTLS unit to be a tag, 2 Power the tag by either a connecting a USB battery pack or b.
opening the enclosure and inserting a rechargeable battery. Prepare the Tablet, 1 Download the apk Android application file Decawave DRTLS. Manager from the Decawave website to your tablet, 2 Follow the instructions on the tablet to install the application. Create a Network,1 Open the Decawave DRTLS Manager application. 2 Tap Start Device Discovery, 3 Tap one of the listed devices and an option will appear to name a. network this device will be added to that network, 4 Repeat for the remaining devices to add them to this network swipe.
right to remove a device from the list, 5 All RTLS units will initially appear as tags in passive UWB mode. Configure the RTLS Units as Anchors or Tags, Tap the network name and then tap each device in turn to configure it. 1 First identify the RTLS unit by unchecking the LED and tap. to save The LEDs on that device will turn off,2 To configure the 4 anchors for each in turn. a Set the Node Type to Anchor,b Set UWB to Active, c For any one of the anchors check the Initiator box there must. always be one initiator in the network,d Tap to save.
3 To configure the tag,a Set the Node Type to Tag,b Set UWB to Active. c Select RESPONSIVE MODE STATIONARY DETECTION and,LOCATION ENGINE. d Tap to save,Auto Position the Anchors for up to 4 anchors. Note 1 The Auto Positioning function is a quick setup feature to automatically determine. the anchor locations Note that this feature may result in a small error in anchor location. making reported tag locations less accurate For best results it is recommended that. anchor positions are measured to cm accuracy and manually entered see below. Note 2 Ensure Line of Sight between the anchors during these steps. On the Network Details screen tap the Auto Position button in the. upper right pull down menu anchors within Bluetooth range appear. 2 RE ORDER, Re order the anchors in the list to match their locations in the room. a Order the anchors anti clockwise in the room as shown above. b The 1st anchor in the list is the 0 0 co ordinate. 3 MEASURE Tap Measure to start the auto positioning. 4 PREVIEW Tap PREVIEW to check locations before saving. 5 SET HEIGHTS Enter heights of the anchors by tapping Z AXIS. 6 SAVE Save the anchors setup by tapping SAVE,Manually Position the Anchors.
Anchor co ordinates can be measured manually and entered in the. settings screen of each anchor, 1 START On Network Details screen tap to edit each anchor. 2 MEASURE Enter the x y z co ordinate in the POSITION section. 3 SAVE Tap to save,Track your Tags, 1 From the Network Details screen each device will be listed like this. 2 Tap the tag ranging circle to change to or to show it on the grid. 3 Ranging starts automatically, 4 Tap the Grid option at the top of the screen to see the grid. 5 Pinch to zoom, 6 Tags automatically select 4 anchors to range with. 7 A floorplan can be uploaded into the application from the tablet s. Other Configurations and Options, MDEK1001 can be used to evaluate many configuration options e g.
11 Anchors 1 Tag,4 Anchors 8 Tags,4 Anchors 7 Tags 1 Listener. A listener can be used to collate location information from many tags to. a display on the Decawave DRTLS Manager or b send to a PC. A PC can be used to connect directly via USB to a tag or to an RTLS unit. configured as a listener in order to collect and log the location data from. the tags This can be done using a terminal interface. Finally the DWM1001 firmware can be modified and re programmed by. the user to create a custom RTLS solution, For these and other details and instructions see the MDEK1001. System User Manual and module Firmware User API Guides. available at www decawave com,DOCUMENT INFORMATION. Disclaimer, Decawave reserves the right to change product specifications without notice As far as possible changes to. functionality and specifications will be issued in product specific errata sheets or in new versions of this. document Customers are advised to check with Decawave for the most recent updates on this product. Copyright 2017 Decawave Ltd,LIFE SUPPORT POLICY, Decawave products are not authorized for use in safety critical applications such as life support where a.
failure of the Decawave product would reasonably be expected to cause severe personal injury or death. Decawave customers using or selling Decawave products in such a manner do so entirely at their own risk. and agree to fully indemnify Decawave and its representatives against any damages arising out of the use. of Decawave products in such safety critical applications. Caution ESD sensitive device Precaution should be used when handling the device in order. to prevent permanent damage,REGULATORY APPROVALS, This MDEK1001 evaluation kit based on Decawave s DW1000 IC DWM1001 module is intended solely. for use by competent engineering personnel for the purposes of evaluating the use of Decawave s. DW1000 IC DWM1001 module in wireless location and communications systems. The MDEK1001 as supplied from Decawave has not been certified for use in any particular geographic. region by any regulatory body governing radio emissions in such regions. The MDEK1001 is supplied under the following conditions. The distribution and sale of the MDEK1001 is intended solely for use in future development of. devices which may be subject to regulations or other authority governing radio emission. This MDEK1001 may not be resold by users for any purpose. The MDEK1001 as supplied by Decawave may not be incorporated directly into user devices or. products unless such products undergo the appropriate certification. Operation of the MDEK1001 in the development of future devices is at the discretion of the user. and the user bears all responsibility for any compliance with regulations laid down by the authority. governing radio emissions in the user s jurisdiction. All products developed by the user incorporating the DW1000 or DWM1001 must be approved by the. relevant authority governing radio emissions in a jurisdiction prior to the marketing or sale of such products. in that jurisdiction User bears all responsibility for obtaining such approval. If the user has obtained the MDEK1001 for any purpose other than those listed above the user should. return the MDEK1001 to the supplier immediately, FCC NOTICE This kit is designed to allow i product developers to evaluate electronic components. circuitry or software associated with the kit to determine whether to incorporate such items in a finished. product and ii software developers to write software applications for use with the end product This kit is. not a finished product and when assembled may not be resold or otherwise marketed unless all required. FCC equipment authorizations are first obtained Operation is subject to the conditions that this device not. cause harmful interference to licensed radio stations and that this device accept harmful interference. Unless the assembled kit is designed to operate under Part 15 Part 18 or Part 95 of the FCC Rules the. operator of the kit must operate under the authority of an FCC license holder or must secure an. experimental authorization under Part 5 of the FCC Rules. MDEK1001 Quick Start Guide Welcome Thank you for purchasing the MDEK1001 Module Development amp Evaluation Kit for the Decawave DWM1001 UWB Bluetooth module using Decawave s DW1000 IC This Quick Start Guide is all that is needed to use the MDEK1001 kit to get a DWM1001 Real Time Location System DRTLS up and running quickly The system can be easily configured and visualised using a

Related Books