LIST OF GOODS REFERRED TO IN ARTICLES 2 15 AND 2 17 27 28 71

List Of Goods Referred To In Articles 2 15 And 2 17 27 28 71-Free PDF

  • Date:29 Jul 2020
  • Views:0
  • Downloads:0
  • Pages:170
  • Size:651.32 KB

Share Pdf : List Of Goods Referred To In Articles 2 15 And 2 17 27 28 71

Download and Preview : List Of Goods Referred To In Articles 2 15 And 2 17 27 28 71


Report CopyRight/DMCA Form For : List Of Goods Referred To In Articles 2 15 And 2 17 27 28 71


Transcription:

MOTOR VEHICLES AND PARTS,Definitions,1 For the purposes of this Annex. a WP 29 means the World Forum for Harmonization of Vehicle Regulations acting. within the framework of the United Nations and the Economic Commission for Europe. b 1958 Agreement means the Agreement concerning the Adoption of Harmonized. Technical United Nations Regulations for Wheeled Vehicles Equipment and Parts. which can be Fitted and or be Used on Wheeled Vehicles and the Conditions for. Reciprocal Recognition of Approvals Granted on the Basis of these United Nations. Regulations, c 1998 Agreement means the Agreement concerning the establishing of global technical. regulations for wheeled vehicles equipment and parts which can be fitted and or be. used on wheeled vehicles,EU JP Annex 2 C en 1, d UN Regulation means a United Nations Regulation established in accordance with the. 1958 Agreement, e GTR means a global technical regulation established and placed on the Global. Registry in accordance with the 1998 Agreement, f applying a UN Regulation means that a UN Regulation enters into force for a Party in.
accordance with the 1958 Agreement, g type approval means the administrative decision by the competent authorities of a. Party certifying that a type of vehicle part or equipment conforms to the relevant. administrative provisions and technical requirements and. h type approval certificate means the document whereby the competent authorities. officially certify that a type of vehicle part or equipment has been granted a type. 2 Technical regulations and conformity assessment procedures are defined in accordance with. paragraphs 1 and 3 of Annex 1 to the TBT Agreement. EU JP Annex 2 C en 2, This Annex applies to all products of motor vehicles their parts and equipment regulated by the. 1958 Agreement or the 1998 Agreement with the exception of any motor vehicles their parts and. equipment used exclusively for agriculture or forestry falling in particular under Chapters 40 84. 85 87 and 94 of the HS hereinafter referred to as covered products. Objectives, Recognising the importance of motor vehicles their parts and equipment for trade growth and. employment the objectives of this Annex are to, a promote high levels of safety environmental protection energy efficiency and anti theft. performance of motor vehicles their parts and equipment which can be fitted or used on. wheeled vehicles, b facilitate trade between the Parties and access to their respective markets through regulatory.
cooperation as well as the elimination and prevention of adverse effects of non tariff measures. EU JP Annex 2 C en 3, c enhance the international harmonisation of requirements in the context of WP 29 and the. mutual recognition of type approvals granted in accordance with UN Regulations without. requiring any further testing documentation certification or marking and. d achieve convergence of regulatory requirements of the Parties through the application of UN. Regulations and GTRs, Relevant international standards and standardising body. The Parties recognise that the WP 29 is the relevant international standardising body for the covered. products and that UN Regulations and GTRs are relevant international standards for covered. Application of existing UN Regulations, 1 Each Party shall accept on its market products which are covered by a type approval. certificate under the 1958 Agreement for the UN Regulations specified in Appendix 2 C 1 as. compliant with its domestic technical regulations and conformity assessment procedures in. the area regulated by the relevant UN Regulation without requiring any further testing. documentation certification or marking,EU JP Annex 2 C en 4. 2 The Parties shall consult with a view to ensuring safety and environmental protection and to. promoting harmonisation of technical regulations under the 1958 Agreement and shall agree. on the dates for applying the UN Regulations specified in Appendix 2 C 2 no later than seven. years after the date of entry into force of this Agreement When the Parties during those. consultations consider it necessary to amend a specific UN Regulation in order to agree on. the date of application the provisions of Article 6 of this Annex apply. Amendments to existing UN Regulations, 1 Whenever a Party considers it necessary to amend a UN Regulation listed in.
Appendices 2 C 1 or 2 C 2 that Party shall consult with the other Party to consider amending. the UN Regulation, 2 If the Parties agree on amending the UN Regulation the Parties shall cooperate to develop a. draft amendment taking into account road traffic environment of each Party and to submit it. to WP 29 The Parties shall cooperate with a view to the early adoption of the draft. amendment at WP 29,EU JP Annex 2 C en 5, 3 If the Parties agree that an amended UN Regulation listed in Appendix 2 C 2 does not. significantly diverge from the draft amendment developed by the Parties each Party shall. accept type approvals granted pursuant to the amended UN Regulation no later than the date. specified therein In case of disagreement between the Parties the rights and obligations of. the 1958 Agreement shall apply,Establishment of new UN Regulations. 1 Whenever a Party considers it necessary to establish a new UN Regulation that Party shall. consult with the other Party with a view to ensuring safety and environmental protection and. to promoting harmonisation of technical regulations. 2 If the Parties agree on establishing a new UN Regulation they shall cooperate to develop a. joint draft UN Regulation and to submit it to WP 29 The Parties will cooperate aiming at the. early adoption of that draft UN Regulation at WP 29. EU JP Annex 2 C en 6, 3 If the Parties agree that the newly adopted UN Regulation does not significantly diverge from. the original joint draft referred to in paragraph 2 each Party shall accept type approvals. granted pursuant to that new UN Regulation as from the date specified in that UN Regulation. and include it in the list of Appendix 2 C 1 In case of disagreement between the Parties the. rights and obligations of the 1958 Agreement shall apply. Ceasing to apply UN Regulations, 1 In exceptional circumstances where a Party intends to cease applying a UN Regulation listed.
in Appendices 2 C 1 or 2 C 2 that Party shall notify its intention to the other Party This. notification shall be done one year in advance of the date on which the application of the UN. Regulation would cease, 2 Before ceasing to apply a UN Regulation a Party shall engage in a dialogue with the other. Party to explore alternative actions or measures available under the 1958 Agreement. 3 After a Party has explained duly substantiated reasons that Party may decide to cease. applying a UN Regulation in accordance with the 1958 Agreement. EU JP Annex 2 C en 7,Updating of appendices, 1 The Parties shall based on the assessment of the Working Group on Motor Vehicles and Parts. established pursuant to paragraph 1 of Article 22 4 amend Appendices 2 C 1 or 2 C 2 by. decision of the Joint Committee in accordance with paragraph 3 and subparagraph 4 b of. Article 23 2 in order to reflect amendments agreed pursuant to paragraph 3 of Article 6 of. this Annex to include a new UN Regulation pursuant to paragraph 3 of Article 7 of this. Annex and to delist a UN Regulation the application of which has ceased under paragraph 3. of Article 8 of this Annex, 2 The dates agreed pursuant to paragraph 2 of Article 5 of this Annex shall be included in. Appendix 2 C 2 When a UN Regulation specified in Appendix 2 C 2 is applied it shall be. transferred to Appendix 2 C 1, 3 If the Parties cannot agree on the specific amendment in the consultations pursuant to. paragraph 2 of Article 5 in conjunction with Article 6 of this Annex the Parties may change. the date for applying such UN Regulation or agree to remove it from Appendix 2 C 2. EU JP Annex 2 C en 8,ARTICLE 10,International whole vehicle type approvals.
1 Each Party shall apply UN Regulation No 0 and accept products under the 1958 Agreement. of the other Party for which an International Whole Vehicle Type Approval certificate has. been issued as complying with all domestic technical regulations and conformity assessment. procedures in the areas covered by the International Whole Vehicle Type Approval without. requiring any further testing documentation certification or marking. 2 The Parties agree to cooperate in the implementation of UN Regulation No 0 to facilitate its. worldwide use and to cooperate in enlarging the coverage of UN Regulation No 0 to. additional vehicle categories,ARTICLE 11,Amending existing domestic technical regulations. 1 The Parties shall refrain from amending existing domestic technical regulations in a manner. that renders them more trade restrictive than necessary to fulfill a legitimate objective for the. importation and the putting into service on their domestic market of products for which type. approvals have been granted pursuant to UN Regulations. EU JP Annex 2 C en 9, 2 Recognising the importance of international efforts on harmonisation of technical regulations. through UN Regulations the Parties shall consider positively an increase in their convergence. with existing UN Regulations when amending an existing domestic technical regulation with. a view to enhancing safety and environmental protection. ARTICLE 12,Introducing domestic technical regulations. 1 The Parties shall refrain from introducing any new domestic technical regulations or. conformity assessment procedures which have the effect of preventing or increasing the. burden for the importation and the putting into service on their domestic market of products. for which type approvals have been granted under UN Regulations applied by both Parties. for the areas covered by those UN Regulations unless such domestic technical regulations or. conformity assessment procedures are explicitly provided for by those UN Regulations. EU JP Annex 2 C en 10, 2 Except for cases where the Parties complied with Articles 6 and 7 of this Annex when a Party. intends to develop or amend a domestic technical regulation or conformity assessment. procedure in areas not covered by existing UN Regulations the regulatory authorities of the. Party shall, a inform the regulatory authorities of the other Party of the regulatory objective and plan.
as well as transmit any regulatory justification or existing impact assessment regarding. the intended domestic technical regulation or conformity assessment procedure at an. early stage, b assess the possibility to develop and adopt a new UN Regulation or to amend an. existing UN Regulation in the area in which that Party intends to introduce a domestic. technical regulation or conformity assessment procedure and. c notify the Co Chair of the Working Group on Motor Vehicles and Parts of the other. Party when that Party decides to introduce a domestic technical regulation or. conformity assessment procedure in an area not covered by a UN Regulation. EU JP Annex 2 C en 11,ARTICLE 13,Consultation procedure. 1 When a Party decides to introduce or to amend a domestic technical regulation or conformity. assessment procedure in accordance with this Agreement the other Party may request. consultations with that Party which shall accept those consultations without delay During. those consultations the Parties shall cooperate to develop a solution to minimise negative. effects on bilateral trade In situations where the Party requires an immediate action that. Party may adopt the domestic technical regulation or conformity assessment procedure before. the completion of such consultations That Party shall communicate and substantiate the. urgency and imminent risks to safety or the environment. 2 If the Parties fail to agree on a solution the Party referred to in paragraph 1 may adopt its. domestic technical regulation or conformity assessment procedure and the other Party may. have recourse to dispute settlement under Chapter 21 in accordance with Article 19 of this. Annex if it deems that that domestic technical regulation or conformity assessment procedure. could adversely affect trade between the Parties, 3 The decision of the other Party whether or not to invoke consultations under paragraph 1 is. without prejudice to the right of that other Party to have recourse to dispute settlement under. Chapter 21 in accordance with Article 19 of this Annex with respect to a new or amended. domestic technical regulation or conformity assessment procedure adopted by the Party. referred to in paragraph 1,EU JP Annex 2 C en 12,ARTICLE 14. Products with new technologies or new features, A Party shall not prevent or unduly delay the placing on its market of a covered product on the.
ground that it incorporates a new technology or a new feature which has not yet been regulated. unless there are duly substantiated risks to human health safety or the environment Each Party. shall implement the relevant provisions of the 1958 Agreement relating to new technologies. ARTICLE 15,Regulatory exception clause, 1 If there are urgent and compelling risks for human health safety or the environment a Party. may refuse the placing of a covered product on its market or may require the withdrawal from. its market of a covered product which is compliant with the technical regulations and. conformity assessment procedures referred to in this Annex Such a refusal or requirement. LIST OF GOODS REFERRED TO IN ARTICLES 2 15 AND 2 171 Chapter Description of goods 25 Salt sulphur earths and stone plastering materials lime and cement 26 Ores slag and ash 27 Mineral fuels mineral oils and products of their distillation bituminous substances mineral waxes 28 Inorganic chemicals organic or inorganic compounds of precious metals of rare earth metals of radioactive

Related Books