Instruction Manual Reflectorless Total Station Cygnus Sokkia-Free PDF

  • Date:29 Jun 2020
  • Views:9
  • Downloads:0
  • Pages:182
  • Size:4.84 MB

Share Pdf : Instruction Manual Reflectorless Total Station Cygnus Sokkia

Download and Preview : Instruction Manual Reflectorless Total Station Cygnus Sokkia

Report CopyRight/DMCA Form For : Instruction Manual Reflectorless Total Station Cygnus Sokkia


Thank you for purchasing the Reflectorless Total Station CYGNUS. For the best performance of the instruments please carefully read these instructions. and keep them in a convenient location for future reference. General Handling Precautions, Before starting work or operation be sure to check that the instrument is. functioning correctly with normal performance,Do not submerge the instrument into water. The instrument can not be submerged underwater, The instrument is designed based on the International Standard IP54 therefore it is. protected from the splashing water,Setting the instrument on a tripod. When mounting the instrument on a tripod use a wooden tripod when possible The. vibrations that may occur when using a metallic tripod can effect the measuring precision. Installing the tribrach, If the tribrach is installed incorrectly the measuring precision could be effected.
Occasionally check the adjusting screws on the tribrach Make sure the base fixing lever is. locked and the base fixing screws are tightened,Guarding the instrument against shocks. When transporting the instrument provide some protection to minimize risk of shocks. Heavy shocks may cause the measurement to be faulty. Carrying the instrument,Always carry the instrument by its handgrip. Exposing the instrument to extreme heat, Do not leave the instrument in extreme heat for longer than necessary It could adversely. affect its performance,Sudden changes of temperature. Any sudden change of temperature to the instrument or prism may result in a reduction of. measuring distance range i e when taking the instrument out from a heated vehicle Let. instrument acclimate itself to ambient temperature. Battery level check,Confirm battery level remaining before operating.
Do not hold the lower part of display unit, When you take out the instrument from a carrying case or keep into the case please hold. the hand grip and base of the instrument Please do not hold the lower part of the display. External power source, Use only recommended batteries Use of batteries not recommended by us may result in. equipment failure, For further information see the chapter BATTERY SYSTEM. Display for Safe Use, In order to encourage the safe use of products and prevent any danger to the operator and. others or damage to properties important warnings are put on the products and inserted in the. instruction manuals, We suggest that everyone understand the meaning of the following displays and icons before.
reading the Safety Cautions and text,Display Meaning. Ignoring or disregard of this display may lead to the danger of death or. serious injury, Ignoring or disregard of this display may lead to personal injury or phys. ical damage,Injury refers to hurt burn electric shock etc. Physical damage refers to extensive damage to buildings or equipment and furniture. Safety Cautions, There is a risk of fire electric shock or physical harm if you attempt to disassemble or repair. the instrument yourself, This is only to be carried out by an authorized dealer only.
Cause eye injury or blindness,Do not look at the sun through a telescope. High temperature may cause fire,Do not cover the charger while it is charging. Risk of fire or electric shock,Do not use damaged power cable plug and socket. Risk of fire or electric shock,Do not use a wet battery or charger. May ignite explosively, Do not use the unit in areas exposed to high amounts of dust or ash in areas where there is inadequate ventilation.
or near combustible materials An explosion could occur. Battery can cause explosion or injury,Do not dispose in fire or heat. Risk of fire or electric shock, Do not use any power voltage except the one given on manufacturers instructions. Battery can cause outbreak of fire, Do not use any other type of charger other than the one specified. Risk of fire or electric shock, Do not use an AC cable incompatible with the power supply voltage in use. The short circuit of a battery can cause a fire,Do not short circuit battery when storing it.
Use of controls or adjustment or performance of procedures other than those specified herein may result in haz. ardous radiation exposure, Do not connect or disconnect equipment with wet hands you are at risk of electric shocks if you do. Risk of injury by overturn the carrying case,Do not stand or sit on the carrying cases. Please note that the tips of tripod can be hazardous be aware of this when setting up or carrying the tripod. Risk of injury by falling down the instrument or case. Do not use a carrying case with a damaged grips or latches. Do not allow skin or clothing to come into contact with acid from the batteries if this does occur then wash off with. copious amounts of water and seek medical advice, A plumb bob can cause an injury to a person if used incorrectly. It could be dangerous if the instrument falls over please ensure you attach a hand grip to the instrument securely. Ensure that you mount the Tribrach correctly failing to do so may result in injury if the tribrach were to fall over. It could be dangerous if the instrument falls over please check that you fix the instrument to the tripod correctly. Risk of injury by falling down a tripod and an instrument. Always check that the screws of tripod are tightened. The battery is to be disposed of safely, The appliance is not intended for use by young children or infirm persons without supervision. Young children should be supervised to ensure that they do not play with the appliance. 1 This product is for professional use only, The user is required to be a qualified surveyor or have a good knowledge of surveying in order to.
understand the user and safety instructions before operating inspecting or adjusting. 2 Wear the required protectors safety shoes helmet etc when operating. Exceptions from Responsibility, 1 The user of this product is expected to follow all operating instructions and make periodic checks of the. product s performance, 2 The manufacturer or its representatives assumes no responsibility for results of a faulty or intentional. usage or misuse including any direct indirect consequential damage and loss of profits. 3 The manufacturer or its representatives assumes no responsibility for consequential damage and. loss of profits by any disaster an earthquake storms floods etc. A fire accident or an act of a third party and or a usage any other usual conditions. 4 The manufacturer or its representatives assumes no responsibility for any damage and loss of profits. due to a change of data loss of data an interruption of business etc caused by using the product or. an unusable product, 5 The manufacturer or its representatives assumes no responsibility for any damage and loss of profits. caused by usage except for explained in the user manual. 6 The manufacturer or its representatives assumes no responsibility for damage caused by wrong. movement or action due to connecting with other products. Laser Safety, CYGNUS is classified as the following class of Laser Product according to IEC Standard Publication. 60825 1 Ed 2 0 2007 and United States Government Code of Federal Regulation FDA CDRH 21CFR. Part 1040 10 and 1040 11 Complies with FDA performance standards for laser products except for. deviations pursuant to Laser Notice No 50 dated June 24 2007. z EDM device in objective lens Class 3R Laser Product. z When using prism Class 2 Laser Product, EDM device is classified as Class 3R Laser Product when reflectorless measurement is selected.
When the prism is selected as target the output is equivalent to the safer class 2. z Use of controls or adjustments or performance of procedures other than those specified herein may. result in hazardous radiation exposure, z Follow the safety instructions on the labels attached to the instrument as well as in this manual to. ensure safe use of this laser product,AVOID EXPOSURE Laser radiation. is emitted from this aperture,Laser beam,LASER RADIATION. AVOID DIRECT EYE EXPOSURE,MAX 5mW LD 625 695nm,CLASS3R LASER PRODUCT. IEC 60825 1 Ed 2 0 2007, z Never point the laser beam at another person If the laser beam strikes skin or an eye it could.
cause serious injury, z Do not look directly into the laser beam source Doing so could cause permanent eye damage. z Do not stare at the laser beam Doing so could cause permanent eye damage. z If an eye injury is caused by exposure to the laser beam seek immediate medical attention from a. licensed ophthalmologist, z Never look at the laser beam through a telescope binoculars or other optical instruments Doing so. could cause permanent eye damage, z Sight the targets so that laser beam does not stray from them. z Perform checks at start of work and periodic checks and adjustments with the laser beam emitted. under normal conditions, z When the instrument is not being used turn off the power. z When disposing of the instrument destroy the battery connector so that the laser beam cannot be. z Operate the instrument with due caution to avoid injuries that may be caused by the laser beam. unintentionally striking a person in the eye Avoid setting the instrument at heights at which the path. of the laser beam may strike pedestrians or drivers at head height. z Never point the laser beam at mirrors windows or surfaces that are highly reflective The reflected. laser beam could cause serious injury, z When using the Laser pointer function be sure to turn OFF the output laser after distance.
measurement is completed Even if distance measurement is canceled the Laser pointer function. is still operating and the laser beam continues to be emitted. z Only those who have been received training as per the following items shall use this product. z Read the Instruction manual for usage procedures for this product. z Hazardous protection procedures read Laser Safety. z Requisite protective gear read Laser Safety, z Accident reporting procedures stipulate procedures beforehand for transporting the injured and. contacting physicians in case there are laser induced injuries. z Persons working within the range of the laser beam are advised to wear eye protection which. corresponds to the laser wavelength of the instrument being used. z Areas in which the lasers are used should be posted with laser warning notices. Symbol mark while the laser is emitting,The following symbol mark will appear at the. right side of the second line TILT SENSOR XY ON,X 0 00 25 Symbol mark. X ON XY ON OFF L PL,FOREWORD 1,General Handling Precautions 2. Display for Safe Use 3,Safety Cautions 3,Exceptions from Responsibility 5.
Laser Safety 6,Symbol mark while the laser is emitting 7. Standard Set Composition 11,1 NOMENCLATURE AND FUNCTIONS 1 1. 1 1 Nomenclature 1 1,1 2 Display 1 3,1 3 Operating Key 1 4. 1 4 Function Key Soft Key 1 5,1 5 Star key mode 1 7. 1 6 Serial signal RS 232C connector 1 9,2 PREPARATION FOR MEASUREMENT 2 1.
2 1 Setting Instrument Up For Measurement 2 1,2 2 Power Switch Key ON 2 2. 2 3 Battery Power Remaining Display 2 3,2 4 Vertical Angle Tilt Correction 2 4. 2 5 How to Enter Alphanumeric characters 2 6,2 5 1 How to Enter Alphanumeric Characters 2 6. 3 ANGLE MEASUREMENT 3 1, 3 1 Measuring Horizontal Angle Right and Vertical Angle 3 1. 3 2 Switching Horizontal Angle Right Left 3 2, 3 3 Measuring from the Required Horizontal Angle 3 2.
3 3 1 Setting by Holding the Angle 3 2, 3 3 2 Setting a Horizontal Angle from the Keys 3 3. 3 4 Vertical Angle Percent Grade Mode 3 3,3 5 Repetition Angle Measurement 3 4. 3 6 Buzzer Sounding for Horizontal Angle 90 Increments 3 5. 3 7 Compasses vertical angle 3 6,4 DISTANCE MEASUREMENT 4 1. 4 1 Setting of the Atmospheric Correction 4 1, 4 2 Setting of the Correction for Prism Constant Non prism Constant 4 1. 4 3 Distance Measurement Continuous Measurement 4 2. 4 4 Distance Measurement N time Measurement Single Measurement 4 3. 4 5 Fine Mode Tracking Mode Coarse Mode 4 4,4 6 Stake Out S O 4 5.
4 7 Offset Measurement 4 6,4 7 1 Angle Offset 4 7,4 7 2 Distance Offset Measurement 4 9. 4 7 3 Plane Offset Measurement 4 11,4 7 4 Column Offset Measurement 4 13. 5 COORDINATE MEASUREMENT 5 1, 5 1 Setting Coordinate Values of Occupied Point 5 1. 5 2 Setting Height of the Instrument 5 2,5 3 Setting Height of Target Prism Height 5 2. 5 4 Execution of Coordinate Measuring 5 3,6 SPECIAL MODE Menu Mode 6 1.
6 1 Application Measurement PROGRAMS 6 2,6 1 1 Remote Elevation measurement REM 6 2. 6 1 2 Missing Line Measurement MLM 6 5,6 1 3 Setting Z Coordinate of Occupied Point 6 8. 6 1 4 Area Calculation 6 11,6 1 5 Point to Line Measurement 6 14. 6 2 Setting the GRID FACTOR 6 16,6 3 Setting Illumination of Display 6 17. 6 4 Setting Mode 1 6 18,6 4 1 Setting Minimum Reading 6 18.
6 4 2 Auto Power Off 6 19, 6 4 3 Vertical Angle Tilt correction Tilt ON OFF 6 20. 6 4 4 Setting RS 232C communication with external device 6 21. 6 5 Setting Contrast of Display 6 22,6 6 ROAD 6 23. 6 6 1 Input Start Point 6 24,6 6 2 Input Road Data 6 25. 6 6 3 Search Data 6 29,6 6 4 Edit Data 6 29,6 6 5 Set OCC and BS 6 30. 6 6 6 Setout Road 6 32,6 6 7 Select a File 6 33,6 6 8 Initialize ROAD data 6 33.
7 DATA COLLECTION 7 1,7 1 Preparation 7 3,7 1 1 Selecting a File for Data Collection 7 3. INSTRUCTION MANUAL 71013 90010 1 FOREWORD Thank you for purchasing the Reflectorless Total Station CYGNUS For the best performance of the instruments please carefully read these instructions and keep them in a convenient location for future reference 2 General Handling Precautions Before starting work or operation be sure to check that the instrument is functioning correctly with normal

Related Books