INSTRUCTION HANDBOOK cdn kyostatics net

Instruction Handbook Cdn Kyostatics Net-Free PDF

  • Date:18 Nov 2020
  • Views:2
  • Downloads:0
  • Pages:167
  • Size:6.20 MB

Share Pdf : Instruction Handbook Cdn Kyostatics Net

Download and Preview : Instruction Handbook Cdn Kyostatics Net


Report CopyRight/DMCA Form For : Instruction Handbook Cdn Kyostatics Net


Transcription:

As an ENERGY STAR Partner KYOCERA MITA CORPORATION has determined. that this product meets the ENERGY STAR guidelines for energy efficiency. The ENERGY STAR program is an energy reduction plan introduced by the United. States Environmental Protection Agency in response to environmental issues and for. the purpose of advancing the development and utilization of more energy efficient. office equipment,ENERGY STAR is a U S registered mark. The Auto Shut off time setting becomes 15 to 120 minutes in the areas. corresponding to the Swiss Energy 2000 program, All rights reserved No part of this material may be reproduced or transmitted in any. form or by any means electronic or mechanical including photocopying recording. or by any information storage and retrieval system without permission in writing from. the Publisher,Legal Restriction On Copying, It may be prohibited to copy copyrighted material without permission of the copy. right owner, It is prohibited under any circumstances to copy domestic or foreign currencies. Copying other items may be prohibited,KM 6230 KME, Please read the instruction handbook before using the copier Keep it in the designated location for.
easy reference, The sections of this handbook and parts of the copier marked with symbols are safety warnings meant to. protect the user other individuals and surrounding objects and ensure correct and safe usage of the copier. The symbols and their meanings are indicated below. DANGER Indicates that serious injury or even death will very possibly result from insufficient attention to. or incorrect compliance with the related points, WARNING Indicates that serious injury or even death may result from insufficient attention to or incorrect. compliance with the related points, CAUTION Indicates that personal injury or mechanical damage may result from insufficient attention to. or incorrect compliance with the related points, The m symbol indicates that the related section includes safety warnings Specific points of attention are. indicated inside the symbol,General warning,Warning of danger of electrical shock.
Warning of high temperature, The symbol indicates that the related section includes information on prohibited actions Specifics of the. prohibited action are indicated inside the symbol,Warning of prohibited action. Disassembly prohibited, The symbol indicates that the related section includes information on actions which must be performed. Specifics of the required action are indicated inside the symbol. Alert of required action,Remove the power plug from the outlet. Always connect the copier to an outlet with a ground connection. Please contact your service representative to order a replacement if the safety warnings in the handbook are. illegible or if the handbook itself is missing fee required. KM 6230 KME,KM 6230 KME, Section 1 IMPORTANT PLEASE READ FIRST 1 1 5 Adding covers for or insert sheets between copies.
Sheet copy mode 5 7,CAUTION LABELS 1 1,1 Submodes 5 8. INSTALLATION PRECAUTIONS 1 2,Cover mode 5 8,PRECAUTIONS FOR USE 1 3 Insert mode 5 8. Chapter mode 5 9,Section 2 NAMES OF PARTS 2 1,2 Combining modes 5 10. 1 Main body 2 2 3 Making copies with the sheet copy mode 5 10. 2 Operation panel 2 3 6 Making handout materials together withTransparencies. 3 Basic screen on the touch panel 2 4 Presentation mode 5 13. 4 Optional units 2 5 Presentation mode copying onto the backing sheet 5 13. Finisher 2 5 Presentation mode leaving the backing sheet blank 5 14. Side Deck 2 6 7 Feeding paper as a backing sheet for transparencies. Transparency backing sheet modes 5 16, Section 3 PREPARATIONS 3 1 Copying onto the backing sheet 5 16. Leaving the backing sheet blank 5 16, 1 Loading paper 3 1 8 Overlaying images Form overlay 5 18.
1 How to load copy paper 3 1 9 Copying the images from either two or four originals onto a. 1 Loading paper into the drawers 3 1 single copy sheet Combine copy 5 19. 2 Loading paper into the Front Deck 3 2 1 Combination styles 5 19. 3 Loading paper into the stack bypass tray 3 2 2 Borderline indication 5 20. 4 Loading paper into the Side Deck option 3 3 10 Making a booklet sheet originals Booklet copy 5 21. 2 Setting originals 3 4 11 Making a booklet two page open face originals. 1 What is the DF for 3 4 Booklet cover copy mode 5 22. 2 Originals that can be set in the DF 3 4 12 Copying and binding into a booklet sheet originals. 3 Cautions when using the DF 3 4 Binding mode 5 24. 4 Setting originals in the DF 3 4 13 Inverting black and white Invert copy mode 5 26. 5 Auto selection mode 3 5 14 Making mirror image copies Mirror image mode 5 26. 6 Setting originals on the platen 3 5 15 Automated sorting Sort copy 5 27. 3 Adding toner 3 5 16 Memorizing frequency used settings Program mode 5 27. 1 Registering various settings as an single program 5 27. Section 4 BASIC OPERATION 4 1 2 Copying with a registered program 5 28. 1 Basic copying procedure 4 1,Section 6 ADVANCED COPY MODES 6 1. 2 Enlargement reduction 4 3, 1 Auto magnification selection mode 4 3 1 Scheduling one copy job during copying of another. 2 Zoom copy mode 4 3 Job reservation 6 1, 3 Standard zoom mode 4 4 The job reservation screen 6 1. 4 Fixed size zoom mode 4 4 1 Adding a job 6 1, 5 XY zoom mode 4 5 2 Modifying the settings for a reserved job 6 2. 3 Two sided copying from various originals 3 Deleting a reserved job 6 2. Two sided copy mode 4 5 4 Changing the order of reserved jobs 6 3. Two sided copying from two sided originals 4 5 2 Copying various originals in one batch Job build function 6 3. Two sided copying from two page open face originals 4 6 1 Memory copying from the DF or platen 6 3. Two sided copying from one sided originals 4 6 Large number of originals 6 3. 4 Interrupt copying 4 7 Uniform copy size Auto size 6 3. 5 Rotate copy 4 8 Continuous manual scanning Choose size 6 3. 6 Before you make a large number of copies at one time 2 Two sided copies from a mixture of one sided and two sided. Test copying 4 8 originals 6 6, 7 Recall mode 4 9 Making copies like the originals Print as originals 6 6.
8 Change settings function 4 9 Two sided copies from all types of originals. 9 Energy saving auto preheat function 4 10 Duplex All Originals 6 6. 10 Auto shut off function 4 10 Copying onto the front side of specified pages. Chapterize 6 6, Section 5 OTHER CONVENIENT FUNCTIONS 5 1 3 Batch copy from the platen 6 8. Sheet originals only 6 8, 1 Making a margin space in the copies for binding etc. Two page open face originals 6 8,Margin mode 5 1,Sheet book originals 6 8. Left margin 5 1,Top margin 5 1,Section 7 DOCUMENT MANAGEMENT FUNCTIONS 7 1. Front back margin 5 1, 2 Printing page numbers on the copies Print page numbers 5 3 1 Registering an image for form overlay 7 1.
3 Copying each side of two page open face originals onto 1 Registering an image 7 1. separate sheets Page separation mode 5 5 2 Checking registered images 7 2. Page separation from two page open face originals 5 5 3 Deleting an image 7 2. Page separation from two sided originals 4 Modifying information for an image 7 3. 4 Erasing the edges around copies from books etc 2 Repeat copying 7 4. Border erase mode 5 6 3 Quick copying 7 4, Erasing blemishes from the edges of copies Sheet 5 6 1 Printing out data 7 4. Erasing blemishes from the edges and middle of copies Book 5 6 2 Checking data for a print job 7 5. Selecting the area to be erased Custom 5 6 3 Deleting data for a print job 7 6. KM 6230 KME,4 Shared data box 7 6 Zoom mode 8 16,1 Registering shared data 7 7 Copy limit 8 16. 2 Printing out shared data 7 7 Custom border erase size 8 16. 3 Checking shared data 7 8 Front back margin key ON OFF 8 16. 4 Deleting shared data 7 9 Drawer for insert sheets 8 16. 5 Modifying information for shared data 7 10 Drawer for cover sheet 8 16. 5 Synergy print boxes 7 10 Rotate sort 8 16, 1 Registering originals in a synergy print box 7 11 Repeat copying 8 16. 2 Printing out more than one set of originals from a synergy Create shortcut 1 2 8 16. print box 7 12 Customize function display screen 1 5 8 16. 3 Checking originals in a synergy print box 7 13 Accessing the copy default setting mode 8 17. 4 Deleting originals from a synergy print box 7 14 Changing the default settings 8 18. 5 Changing the order of printing 7 15 3 Box management procedures 8 23. 6 Modifying information for a registered synergy print box 7 15 Types of box management procedures 8 23. 6 Virtual mailboxes 7 17 1 Reset box delete all 8 23. 1 Printing out all of the originals in a virtual mailbox 7 17 2 Box name password Clear data in box 8 23. 2 Changing the password 7 18 3 Box default 8 23, 3 Deleting data from a virtual mailbox 7 18 4 Document list 8 23. Accessing the box management procedures 8 24,Section 8 COPIER MANAGEMENT 8 1 Procedures 8 24.
4 Deleting stored data 8 27, 1 Copy management 8 1 5 Toner usage information 8 28. 1 The copy management procedures and settings 8 1 4 Touch panel language selection 8 28. Registering new department codes 8 1 5 Entering characters 8 29. Deleting department codes 8 1 1 Character input screen 8 29. Changing limits 8 1 2 Name registration example 8 29. Clearing copy counts 8 1, Checking copy counts 8 1 Section 9 OPTIONAL EQUIPMENT 9 1. Printing out the copy management report 8 1,Turning copy management ON OFF 8 1 1 Finisher 9 1. 2 How to enter the copy management select mode 8 1 1 Selecting the desired mode 9 1. 3 How to register the various management settings 8 2 2 Copying in the Sort mode 9 2. 4 Making copies when copy management is turned ON 8 6 3 Copying in the Group mode 9 2. 2 Weekly timer 8 7 4 Copying in the Sort Staple mode 9 3. 1 The weekly timer procedures and settings 8 7 5 Copying in the Hole Punch mode 9 4. Setting the time 8 7 6 Copying in the Non sort mode 9 5. Programming the weekly timer 8 7 7 Stacking mode 9 5. Canceling the timer function 8 7 8 Acceptable capacity for the Sort and the Non sort trays 9 5. Turning the weekly timer ON OFF 8 7 9 Stapling Unit 9 6. 2 How to enter the weekly timer select mode 8 7 0 Refilling the Stapling Unit 9 6. 3 How to register the various timer settings 8 8 Clearing a staple jam 9 8. 4 Making copies after the copier has been turned OFF by the Disposing of hole punch scraps 9 9. weekly timer 8 10 2 Booklet Stitcher 9 10, 3 Default settings and procedures 8 10 3 Side Deck 9 11. 1 Machine defaults 8 11 4 Key Counter 9 11, Types of machine defaults 8 11 5 Mailbox Unit 9 12.
1 Custom size paper in stack bypass 8 11 6 Print Scan System 9 12. 2 Automatic drawer switching ON OFF 8 11 7 Tandem Board 9 12. 3 Drawer paper size 8 11, 4 Special paper designation 8 11 Section 10 TROUBLESHOOTING 10 1. 5 APS mode for special paper 8 11, 6 Key sound ON OFF 8 11 1 Messages during copying 10 1. 7 Auto preheat time 8 11 2 Replacing the waste toner tank 10 3. 8 Auto shut off time 8 11 3 If paper misfeeds 10 4. 9 Management pin code change 8 11 1 Misfeed location indicators 10 4. 0 Auto shut off ON OFF 8 11 2 Cautions 10 4,Date time 8 11 3 Removal procedures 10 5. Accessing the machine default setting mode 8 12 4 Troubleshooting tables 10 18. Changing the default settings 8 12 5 Cleaning the copier 10 20. 2 Copy related defaults 8 15, Types of copy defaults 8 15 Section 11 SPECIFICATIONS 11 1. 1 Exposure mode 8 15,2 Exposure step 8 15 Laser safety 11 2.
3 Toner economy mode 8 15,4 Auto exposure adjustment 8 15. 5 Manual exposure adjustment 8 16,6 Copy quality mode 8 16. 7 Sort mode ON OFF 8 16,8 Paper selection 8 16,9 Job Programming 8 16. 0 Default drawer 8 16,KM 6230 KME, MAKING FULL USE OF THE MACHINE S ADVANCED FUNCTIONS. 1 Registering,an image for form overlay,2 Minimizing.
copy time Repeat copying,3 Storing data that is received from your. computer Quick copying page 7 4,The copier must be equipped with the. optional Print Scan System,4 Storing often used forms etc. Shared data box page 7 6,5 Selecting multiple sets of originals for print. out Synergy print boxes page 7 10,6 Storing data from different computers.
Virtual mailboxes page 7 17,The copier must be equipped with the. optional Print Scan System, 7 Enlargement reduction page 7 3 8 Copying onto both the front and back of. the copy paper from various originals 9 binding,Making a margin space in the copies for. etc Margin mode page 5 1,Two sided copy mode page 4 5. 10 Printing page numbers on the copies, Print page numbers function 11 Copying each side of two page open.
face originals onto separate sheets,12 Erasing the edges around copies from. books etc Border erase mode,page 5 3 Page separation mode page 5 5 page 5 6. 13 Adding covers for or insert sheets be, tween copies Sheet copy mode 14 Making handout materials together with. Transparencies 15 Feeding paper as a backing sheet for. transparencies Transparency, page 5 7 Presentation mode page 5 13 backing sheet modes page 5 16. KM 6230 KME, MAKING FULL USE OF THE MACHINE S ADVANCED FUNCTIONS.
16 Overlaying images Form overlay, mode page 5 18 17 Copying the images from either two or. four originals onto a single copy sheet 18 Making a booklet sheet originals. Booklet copy mode page 5 21,Combined copy mode page 5 19. 19 Making a booklet two page open face, originals Booklet cover copy mode 20 Copying and binding into a booklet sheet. INSTRUCTION HANDBOOK 2A080030A KM 6230 KME 131 As an ENERGY STAR Partner KYOCERA MITA CORPORATION has determined that this product meets the ENERGY STAR guidelines for energy efficiency The ENERGY STAR program is an energy reduction plan introduced by the United States Environmental Protection Agency in response to environmental issues and for the purpose of advancing the development

Related Books