Gas Clean Filter System User Guide Agilent

Gas Clean Filter System User Guide Agilent-Free PDF

  • Date:22 Nov 2020
  • Views:4
  • Downloads:0
  • Pages:48
  • Size:10.23 MB

Share Pdf : Gas Clean Filter System User Guide Agilent

Download and Preview : Gas Clean Filter System User Guide Agilent


Report CopyRight/DMCA Form For : Gas Clean Filter System User Guide Agilent


Transcription:

Agilent Technologies Inc 2020 Warranty Safety Notices. No part of this manual may be reproduced in The material contained in this document is. any form or by any means including elec provided as is and is subject to being. tronic storage and retrieval or translation into changed without notice in future editions C AU T I O N. a foreign language without prior agreement Further to the maximum extent permitted by. and written consent from Agilent Technolo applicable law Agilent disclaims all warran. gies Inc as governed by United States and A CAUTION notice denotes a. ties either express or implied with regard to, international copyright laws this manual and any information contained hazard It calls attention to an. herein including but not limited to the implied operating procedure practice or. Manual Part Number warranties of merchantability and fitness for the like that if not correctly. 5973 1528 a particular purpose Agilent shall not be lia performed or adhered to could. ble for errors or for incidental or consequen, tial damages in connection with the result in damage to the product or. furnishing use or performance of this docu loss of important data Do not. Seventh edition July 2020 ment or of any information contained herein proceed beyond a CAUTION notice. Should Agilent and the user have a separate, Sixth edition April 2020 until the indicated conditions are. written agreement with warranty terms cov, Fifth edition November 2019 ering the material in this document that con fully understood and met. Fourth edition July 2019 flict with these terms the warranty terms in. the separate agreement shall control,Third edition August 2013.
WAR N IN G,Second edition May 2013 Technology Licenses. First edition August 2012 The hardware and or software described in A WARNING notice denotes a. this document are furnished under a license hazard It calls attention to an. and may be used or copied only in accor operating procedure practice or. Printed in USA dance with the terms of such license. Agilent Technologies Inc,the like that if not correctly. 2850 Centerville Road Restricted Rights Legend performed or adhered to could. Wilmington DE 19808 1610 USA result in personal injury or death. U S Government Restricted Rights Software, and technical data rights granted to the fed Do not proceed beyond a WARNING. eral government include only those rights notice until the indicated conditions. customarily provided to end user custom are fully understood and met. ers Agilent provides this customary com,mercial license in Software and technical. data pursuant to FAR 12 211 Technical,Data and 12 212 Computer Software and.
for the Department of Defense DFARS,252 227 7015 Technical Data Commercial. Items and DFARS 227 7202 3 Rights in,Commercial Computer Software or Com. puter Software Documentation,Using the Gas Clean Filter System. About the Gas Clean Filter System 4,Components 4,Features 4. Filter types 5,Safety Information 9,General gas safety 9.
Cleaning 9,Recycling the product 9,Installation 10. Before you begin 10,Prepare your instrument 10,Install the connecting unit 10. Connect the gas lines 21,Install the filter to the connecting unit 23. Install a two or four position connecting unit 34,Gas Flow in a Gas Clean Filter 36. Gas Clean Sensor 37,About the Gas Clean sensor 37,To install the Gas Clean sensor 37.
Replacing the Gas Clean Filter 39,When to replace the Gas Clean Filter 39. To replace the Gas Clean Filter 40,Checking for Leaks 43. Indicator changes color from the top down 43,Indicator changes color from the bottom up 44. Replacement Parts 45,User Manual 3,About the Gas Clean Filter System. About the Gas Clean Filter System, The Agilent Gas Clean Filter system delivers high purity gases to your analytical instruments.
reducing the risk of column damage sensitivity loss and instrument downtime The filters are. designed for use with the GC GC MS ICP OES ICP MS LC MS and any other analysis. instrument using carrier gas Six filters are available including CO2 oxygen moisture and. organics trap charcoal,Components, The Gas Clean Filter System consists of a connecting unit and filter Figure 1 The connecting. unit is equipped with inlet and outlet connectors for the gas lines and two needle like valves. that automatically start the flow of gas once a filter is attached The filters come filled with dry. nitrogen and are made from a heavy walled polycarbonate sealed at the base with PTFE. When installed onto the connecting unit the needle like valves puncture the PTFE seals and. allow gas to flow through the filter,Connecting unit Filter. Outlet connector,Inlet connector, Figure 1 The components of the Gas Clean Filter System connecting units vary in appearance but. perform the same functionality, The Gas Clean Filter System delivers the following features and benefits. Cleaner gas longer instrument life greater sensitivity higher data accuracy and overall. long term stability for your instruments and analyses. 4 User Manual,Filter types, A high flow connecting unit that handles flow rates up to 20 L min for collision gas.
applications and supply gas for ICP MS ICP OES and LC MS. A fast stabilizing and absorbent filter material, Filter housing constructed with a transparent and virtually unbreakable heavy walled. polycarbonate material, The ability to change the Gas Clean Filter without tools or gas shut off. Filter types, Each Gas Clean Filter type is designed to filter out a specific impurity that may exist in the gas. supply The following filter types are available, Carbon Dioxide Eliminates CO2 from supply gas to the Total Organic Carbon TOC. analyzer and improves sensitivity and accuracy in TOC analysis. Oxygen Prevents oxidation of the GC column septum liner and glass wool. Moisture Delivers faster stabilization times for increased GC productivity and prevents. hydrolization damage to the stationary phase column liner glass wool or septum in the. Process Moisture Prevents oxidation of GC components and is safe to use with acetylene. in process GC applications, Charcoal Removes organic compounds and ensures correct performance of FID.
detectors in the GC, Carrier Gas Delivers faster stabilization times for increased GC productivity removes. oxygen moisture and hydrocarbons from the carrier gas for MS applications and provides. ultimate GC column protection, Sulfur Removes water and sulfur specific compounds such as H2S COS and SO2 from. gas streams for the SCD, Table 1 on page 6 shows recommended filter connection diagrams for common instrument. configurations,User Manual 5,Filter types,Table 1 Connection diagrams for common detectors. Detector Connection Diagram, ECD Carrier Gas Oxygen Filter Moisture Filter Column.
Electron Capture Detector,Nitrogen Oxygen Filter Moisture Filter. Make Up Gas,Anode Purge Gas, FID Carrier Gas Oxygen Filter Moisture Filter Column. Flame Ionization Detector,Carrier Gas Make Up Gas,Hydrogen Charcoal Filter. Air Charcoal Filter,FID Carrier Gas GC MS Filter Column. Flame Ionization Detector,Make Up Gas Charcoal Filter.
Carrier Gas differs,from Make Up Gas,Hydrogen Charcoal Filter. Air Charcoal Filter, FPD Carrier Gas Oxygen Filter Moisture Filter Column. Flame Photometric Detector,Hydrogen Charcoal Filter Flame 1. Air Charcoal Filter FPD,Pulsed Flame Photometric,6 User Manual. Filter types, Table 1 Connection diagrams for common detectors continued.
Detector Connection Diagram,MS ITD MSD Carrier Gas GC MS Filter Column. Ion Trap Detector,Mass Selective Detector MS,Carrier Gas Oxygen Filter Moisture Filter Column. NPD PND Carrier Gas Oxygen Filter Moisture Filter Column. Nitrogen Phosphorous Detector,Make Up Gas,Hydrogen Charcoal Filter. Thermionic Detector TSD,Air Charcoal Filter,Carrier Gas Make Up Gas. TCD Carrier Gas Oxygen Filter Moisture Filter Column. Thermal Conductivity Detector,Reference Channel,Make Up Gas TCD.
if necessary,SCD Hydrogen Sulfur Filter,Sulfur Chemiluminescence. Oxygen Air Sulfur Filter,User Manual 7,Filter types. Table 1 Connection diagrams for common detectors continued. Detector Connection Diagram,ICP OES ICP MS,Oxygen Filter. Inductive Coupled Supply Gas ICP OES,Plasma Optical Emission Oxygen Filter. Spectrometry Mass,Spectrometry,Plasma Gas Nebulizer Gas.
Oxygen Filter,Inductive Coupled Supply Gas ICP OES. Plasma Optical Emission Oxygen Filter,Different Optic Flush Gas. High Flow Base Plate,Optic Flush Gas Oxygen Filter. Total Organic Carbon TOC Carrier Gas CO2 Filter Moisture Filter TOC Analyzer. Zero Air Generator Carrier Gas CO2 Filter Moisture Filter Zero Air Generator. Moisture Filter,Mass Spectrometry Supply Gas LC MS. Moisture Filter,High Flow Base Plate, Contact your local Agilent sales representative for the filter sets applicable to your instrument.
configuration,8 User Manual,Safety Information,Safety Information. General gas safety, Wear eye protection when using compressed gas to avoid eye injury. Fasten all compressed gas cylinders securely to an immovable structure or permanent. Store and handle compressed gases in accordance with relevant safety codes. Do not put gas cylinders in the path of a hot air vent including a GC oven exhaust. Perform periodic leak checks on supply lines fittings and pneumatic plumbing to prevent a. potentially hazardous condition, Wipe away dust and residue using a lint free cloth. Once the filter is consumed the filter and filter material cannot be replenished or reused. Recycling the product, When filters are replaced they must be treated as chemical waste and disposed of according. to local policy,User Manual 9,Installation,Installation.
Before you begin, Be sure to choose a centralized installation location where all instruments are easily reachable. and where the filter s indicating material is always visible. Gas Clean Filter connecting units are available for both 1 4 inch and 1 8 inch gas lines Be sure. you have selected the appropriate connecting unit to use with your lab setup. Prepare your instrument,Prepare your instrument by doing the following. 1 Lower any heated zone temperatures on your instrument to less than 100 C. 2 Set any purge flows on your instrument to 400 mL min. 3 If your system pressure is higher than 7 bar 100 psi reduce the pressure. Install the connecting unit, The connecting unit can be mounted on a laboratory bench top affixed to the wall with. optional wall mounting bracket for the single filter connecting unit or mounted to the back of. a 7890 9000 8860 or 8890 GC with the respective Gas Clean Carrier Gas Kit. If you wish to install your connecting until to a laboratory bench top see Installing on a. laboratory bench top below, If you wish to install your connecting unit to a wall skip to Installing on a wall on page 11. If you have the Gas Clean Carrier Gas Kit for 7890 CP17988 and wish to install the. connecting unit to the back of a 7890 GC skip to Installing the Gas Clean Carrier Gas Kit. for 7890 on page 17, If you have the Gas Clean Carrier Gas Kit for 9000 CP17995 and wish to install the.
connecting unit to the back of a 9000 GC skip to Installing the Gas Clean Carrier Gas Kit. for 9000 on page 19, If you have the Gas Clean Carrier Gas Kit for 8860 and 8890 CP179880 and wish to install. the connecting unit to the back of a 8860 or 8890 GC skip to Installing the Gas Clean. Carrier Gas Kit for 8860 and 8890 on page 20,Installing on a laboratory bench top. You can install the connecting unit onto the laboratory bench top using two screws not. Gather the following, Screws 2 at least 25 mm long and less than 5 mm od not supplied. Screw driver or power drill, To install the connecting unit to the laboratory bench top. 10 User Manual,Install the connecting unit, 1 Remove the two black plastic caps by pushing a thin narrow object such as a paper clip.
from the bottom of the connecting unit into the underside of the caps until they pop out. Figure 2 Removing the plastic caps from the connecting unit. 2 Determine the best location on your laboratory bench top to install the connecting unit and. Make sure the filter s indicator is clearly visible so that exhausted filters can be easily. identified, Make sure you have ample space above the bench top and connecting unit for. installation and removal of the filter, Make sure the gas lines reach the location and will not interfere with other activities in. the chosen installation location, Check that the mounting screws will not penetrate any dangerous objects such as gas. and power lines, 3 Place the connecting unit in the chosen location and use a screw driver or power drill to. install the screws into the bench top through the two openings on the top of the connecting. 4 Replace the black plastic caps on the connecting unit to cover the two screw hole. Installing on a wall, This option is only available for a single filter connecting unit using the optional wall mounting.
Gather the following,Wall mounting bracket kit CP7981. Flathead screw driver,Hex wrench 4 mm,Power drill with 5 mm od drill bit. User Manual 11,Install the connecting unit,To install the wall mounting bracket. 4 User Manual About the Gas Clean Filter System The Agilent Gas Clean Filter system delivers high purity gases to your analytical instruments reducing the risk of column damage sensitivity loss and instrument downtime The filters are designed for use with the GC GC MS ICP OES ICP MS LC MS and any other analysis instrument using carrier gas Six filters are available including CO2

Related Books